buzz forums

forums of the buzz
It is currently Tue Jun 19, 2018 12:06 pm

All times are UTC




Post new topic Reply to topic  [ 17 posts ] 
Author Message
PostPosted: Wed Aug 14, 2013 2:06 pm 
User avatar

Joined: Wed Nov 23, 2011 3:24 pm
Posts: 553
Download from SourceForge

Updates:

2018.06.07 - Version 1.3d
+ Fixed repeat triggering of switch params when subtick timing is enabled
+ Changed "Heed Stop Btn" attribute to "Heed Transport". LFO can now respond to both play and stop buttons.

2018.05.27 - Version 1.3c
+ Increased accuracy of period display in Hz

Feb 2015 - Stuff, dunno.

2013.08.14
+ Fixed assign dialog crash after target machine has been deleted and then restored


Last edited by IXix on Thu Jun 07, 2018 12:02 pm, edited 2 times in total.

Top
 Profile  
 
PostPosted: Sun May 27, 2018 1:13 pm 
User avatar

Joined: Wed Nov 23, 2011 3:24 pm
Posts: 553
Teeny tiny update bump. :)


Top
 Profile  
 
PostPosted: Mon May 28, 2018 5:28 am 
User avatar

Joined: Mon Feb 25, 2013 9:31 am
Posts: 444
Location: Mörkö / Groke Island
Interesting!


Top
 Profile  
 
PostPosted: Mon May 28, 2018 2:24 pm 

Joined: Tue Nov 22, 2011 5:25 pm
Posts: 383
The link doesn't work for me, I feel a big frustration.


Top
 Profile  
 
PostPosted: Mon May 28, 2018 3:37 pm 
User avatar

Joined: Wed Nov 23, 2011 3:24 pm
Posts: 553
tinga wrote:
The link doesn't work for me, I feel a big frustration.

Sorry tinga, try these...

PeerLFO x86 - 2018.05.27.zip
PeerLFO x64 - 2018.05.27.zip


Top
 Profile  
 
PostPosted: Mon May 28, 2018 5:19 pm 
User avatar

Joined: Tue Nov 22, 2011 5:22 pm
Posts: 479
Location: France
IXix wrote:
tinga wrote:
The link doesn't work for me, I feel a big frustration.
Sorry tinga, try these..
PeerLFO x86 - 2018.05.27.zip
PeerLFO x64 - 2018.05.27.zip


These doesnt work for me... :(


Top
 Profile  
 
PostPosted: Mon May 28, 2018 9:11 pm 
User avatar

Joined: Wed Nov 23, 2011 3:24 pm
Posts: 553
tinga wrote:
The link doesn't work for me, I feel a big frustration.

magmavander wrote:
These doesnt work for me... :(

Hey, stop ganging up on me! :lol:

That's weird, the Dropbox links work for me (and I'm not logged in), although I do get Dropbox's stupid preview error. Sourceforge says the files are unavailable for some reason.

Can you browse this folder? https://www.dropbox.com/sh/evamdlcllujznqi/AAAfadFlhpikbNd3Ilbpkpk7a?dl=0

edit: BTD stuff is in the "Other" folder
edit edit: Re-uploaded to SF but there seems to be a delay before the links become active (virus scanning?) and I don't know how long it takes.


Top
 Profile  
 
PostPosted: Mon May 28, 2018 9:28 pm 

Joined: Sat Nov 26, 2011 4:06 pm
Posts: 154
Some kind of Franceblock ?


Top
 Profile  
 
PostPosted: Mon May 28, 2018 9:37 pm 
User avatar

Joined: Wed Nov 23, 2011 3:24 pm
Posts: 553
ags wrote:
Some kind of Franceblock ?

The thought did cross my mind. :lol:

SourceForge seems to have accepted the new files even though they're exactly the same as the old files. PeerLFO and PeerADSR downloads are working fine for me now (and I logged out of SF to be on the safe side.)


Top
 Profile  
 
PostPosted: Wed Jun 06, 2018 9:36 pm 
User avatar

Joined: Mon Feb 25, 2013 9:31 am
Posts: 444
Location: Mörkö / Groke Island
Would it be possible to also update the PeerLFO to 65535 ticks or would that break it?


Top
 Profile  
 
PostPosted: Wed Jun 06, 2018 10:07 pm 
User avatar

Joined: Wed Nov 23, 2011 3:24 pm
Posts: 553
AndersBrontosaurus wrote:
Would it be possible to also update the PeerLFO to 65535 ticks or would that break it?

Hmmm, maybe. I'll have a look...


Top
 Profile  
 
PostPosted: Thu Jun 07, 2018 12:51 pm 
User avatar

Joined: Wed Nov 23, 2011 3:24 pm
Posts: 553
Update bump again. I fixed a bug that broke tinga's insane autoplay creations (from Feb 2015! Can't believe you didn't report it sooner!) and changed the "Heed Stop Btn" attribute to "Heed Transport".

AndersBrontosaurus wrote:
Would it be possible to also update the PeerLFO to 65535 ticks or would that break it?

There are various possibilities:

  1. Add "Ticks" to the range of the Rate Unit. It would have to go at the end to maintain compatibility, so it would be a bit scruffy but wouldn't break anything.
  2. Add an attribute to set the ticks mode (default tick/16) so you could have ticks, ticks/2, ticks/4 etc. and the rate param would use whichever was selected. You could have multipliers too eg. tick*128 for really long periods, although there will be a limit to how long the period can be. It would be set up so that old songs would automatically use tick/16 so as not to break anything.
  3. Add a "Tick subdivision" attribute, (default 16) similar to the above but you would just enter the divisor. Tick/1 would be the slowest.
  4. Completely change the range of the Rate Unit parameter (redefine all the unit choices) and add an attribute to specify whether to use old or new behaviour. Old songs would automatically use the old behaviour.
  5. Add a "Multiplier" parameter to multiply the value set by the existing parameters by various values eg. x0.5, x1, x2, x4. That would be awkward though because you'd have to do math to work out exactly how long the period was.
  6. Get off my lazy backside and make PeerLFO v2! This is obviously the best option but time blah blah blah...

Adding attributes has always been okay in Buzz (IIRC missing attributes are set to the default but I'd have to test it).

Adding parameters doesn't break compatibility anymore but would for some older versions. Not sure what version changed that, IIRC it was around when Oskari was developing Qsamo.

I don't know what effect adding params/attributes would have on Buzé. I don't even know if it uses the same dlls as Buzz.


Top
 Profile  
 
PostPosted: Thu Jun 07, 2018 11:15 pm 

Joined: Tue Nov 22, 2011 5:25 pm
Posts: 383
IXix wrote:
Can't believe you didn't report it sooner!

Yes, I it"s very weird, :o , I was so afraid that LFO was broken, I immediately returned to the 1.3, but this last years, my buzz activity was limited to test Snowglobe ScaleWalker, interactions with other peer machines, Corona.
Now my job stops in 3 weeks 8-) , so i will have time to crash my head with buzz.
LFO 1.3d works fine, and I love it, 0.0002 HZ is 83 minutes, Peer LFO is amazing since the subtick setting, it"s great you make it alive :dance:


Top
 Profile  
 
PostPosted: Fri Jun 08, 2018 7:23 am 
User avatar

Joined: Wed Nov 23, 2011 3:24 pm
Posts: 553
tinga wrote:
LFO 1.3d works fine, and I love it, 0.0002 HZ is 83 minutes

Great! :dance:


Top
 Profile  
 
PostPosted: Sat Jun 09, 2018 2:42 am 
User avatar

Joined: Sun Apr 23, 2017 1:03 am
Posts: 97
Location: Canada
Just installed the newest version. Works great for me! Thanks for the continued development on these great machines IX! :dance:

See You In The Shadows…


Top
 Profile  
 
PostPosted: Sat Jun 09, 2018 10:29 am 
User avatar

Joined: Thu Nov 24, 2011 7:14 am
Posts: 250
Yes, thanks a lot for keepin' on! :dance: :dance: :dance:


Top
 Profile  
 
PostPosted: Sat Jun 09, 2018 6:54 pm 
User avatar

Joined: Wed Nov 23, 2011 3:24 pm
Posts: 553
Candle wrote:
Thanks for the continued development on these great machines IX! :dance:
I think "development" might be overstating it a bit but you're welcome. :D


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ] 

All times are UTC


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group