buzz forums

forums of the buzz
It is currently Tue Jul 16, 2019 9:06 am

All times are UTC




Post new topic Reply to topic  [ 30 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: Portability
PostPosted: Tue Apr 07, 2015 7:33 pm 
User avatar

Joined: Wed Mar 26, 2014 7:07 am
Posts: 311
http://www.atacomipc.com/program/ipc_we ... aQodUZsA2Q

I found this using google shopping. I'm not familiar with the gaida boards. If it isn't available here you can maybe order it from abroad if you search ali baba or something.

Good luck on your quest! I've just replaced my msi z87i with an asus z97i plus to mitigate some rfi issues.


Top
 Profile  
 
 Post subject: Re: Portability
PostPosted: Sat Apr 25, 2015 3:05 am 
User avatar

Joined: Wed Nov 23, 2011 1:15 am
Posts: 517
Location: deep beneath the earths crust
i'm curious as to how portable you're aiming to make this. are you going to make something that's wearable and can traverse long walks with you, or something that's just easy to take to performances?


Top
 Profile  
 
 Post subject: Re: Portability
PostPosted: Tue Jun 02, 2015 8:30 pm 
User avatar

Joined: Thu Mar 15, 2012 2:15 am
Posts: 97
Location: Sweden
Bit of an update:

I bought an Intel NUC i7 (NUC5i7RYH). It's very tiny. I put 16GB of RAM in it, a solid state drive and a hard drive. It runs very well, and both Buzz and Maschine work quite nicely on it (although the lack of dedicated line input sucks, so I'm currently using a Babyface external USB audio interface, which works great so far).

I've hollowed out (and sawed into) a GameCube chassis. The NUC innards should be able to fit, along with a slot-in blu-ray drive (with USB adapter, since there's only one SATA port), a USB hub and the original GC fan. Not sure if I'd be able to run the NUC on a battery, but I'll be looking into that eventually (I don't want to risk destroying it, so I'm waiting for someone else to try it first). I'll try to leave room for one in the chassis in case I decide to make that upgrade. I'll be using Lego and hot glue to put things in place inside. The glue will hold down the Lego, and the Lego will hold the other things in place. Screws where needed.

I also have a 7" touch screen. It's not very bright and the touch is a bit frustrating, but I've tested it and it works. I haven't quite figured everything out, but I figure I'll make a makeshift case for it out of Lego just to keep the controller board and everything in place. I might make some kind of contraption to attach it to some kind of mini keyboard thing. It's all loose prototype ideas at this stage.


Top
 Profile  
 
 Post subject: Re: Portability
PostPosted: Sun Jun 07, 2015 7:35 am 
User avatar

Joined: Wed Nov 23, 2011 1:15 am
Posts: 517
Location: deep beneath the earths crust
sounds wild. pics? :)


Top
 Profile  
 
 Post subject: Re: Portability
PostPosted: Fri Jun 12, 2015 8:47 pm 
User avatar

Joined: Thu Mar 15, 2012 2:15 am
Posts: 97
Location: Sweden
szaszhareen wrote:
sounds wild. pics? :)

There'll be pics when there's anything worth taking pics of. As it is at the moment, there isn't much to look at, just a NUC and a mess. I need to get a hold of my old Lego to get further with this. I figure the next step should be some kind of makeshift case for the 7" screen, and probably testing to see if/how it can share USB power source with a keyboard. I do know it can run on 5V, but I'm not sure how many Ampere it. If I can run screen, keyboard and two pointing devices (crappy touch and something more precise) all on one port (with one hub, no external power), that'd let me avoid having three cables to the handheld unit.
Another option might be using a wireless combined keyboard/trackpad and running that and the screen off the same rechargeable battery, but I've yet to find one of those keyboards where the keys are aligned properly (which is of course a big deal in Buzz).


Top
 Profile  
 
 Post subject: Re: Portability
PostPosted: Sat Jun 13, 2015 3:16 am 
User avatar

Joined: Wed Nov 23, 2011 1:15 am
Posts: 517
Location: deep beneath the earths crust
Mozart von Robot wrote:
just a NUC and a mess


sounds like a pic worth seeing XD


Top
 Profile  
 
 Post subject: Re: Portability
PostPosted: Sat Jun 13, 2015 11:56 am 
User avatar

Joined: Thu Mar 15, 2012 2:15 am
Posts: 97
Location: Sweden
szaszhareen wrote:
Mozart von Robot wrote:
just a NUC and a mess


sounds like a pic worth seeing XD


Well, you wouldn't be able to see it all in one pic. Technically, it's multiple messes and a lot of it is standing under other things. Also, there's the camera thing.

On top of the base of the gutted laptop I'm using as a monitor, there's a plank of wood (actually a shelf). On top of that, I've got the NUC and a tiny mouse on the right. Cables hanging off the back in a maybe not entirely good for the ports fashion. One USB1 hub dongle thing (for mouse, keyboard, optical drive secondary power) and one cable for the RME Babyface audio interface. On the left, the Babyface and a small audio mixer (for lack of XLR to RCA adapters - awaiting those in the mail). The mixer is standing on top of a broken USB hub strip and a marker pen (looking for something better to put there), to make room for the (still naked) optical drive under the mixer. On top of the mixer, there's a USB2 hub/card reader combo. Cables hanging off that as well. Between the NUC and the mixer is a keyboard and a USB3 hard drive (which is plugged into the NUC).
That's mess number one.

Mess number two is a cardboard box with the 7" screen and controller boards in it. Not much to look at.

Mess number three is just a hollowed out Gamecube chassis. You can pretty much assume what that looks like.

Keyboard update: After a bit of searching on eBay, I found a wireless keyboard/trackpad that's correctly aligned. I obviously couldn't find a Swedish one, but it's an acceptable compromise. Measy keyboard touch pad. The smaller model.
Image
There's also a slightly larger iPazzPort keyboard where the trackpad doubles as numeric keypad.
Image
I'd get that for home use if there were a Swedish version. As it is right now, I'm using a full sized Hama keyboard I found dirt cheap at a flea market. The space key is a bit squeaky and the tab key was fucked up, but I ripped off the sleep/wake/power keys (because I hate them with a fiery passion) and put the wake up key where the tab key was (and covered the sleep/wake/power area with a piece of cardboard). I also have a more compact DeltaCo (or is it DelTaco?) keyboard I was using before, but I kept hitting the insert key by accident while typing because it's right next to the left arrow key.

So...yeah...lots of mess. I'll see if I can get a webcam pic of some of it.

ETA: I just impulse ordered a XBox 360 mini controller. If i can work that into the handheld unit, all the better. Probably not at the lego stage, but maybe later.


Top
 Profile  
 
 Post subject: Re: Portability
PostPosted: Sun Jun 14, 2015 12:25 am 
User avatar

Joined: Thu Mar 15, 2012 2:15 am
Posts: 97
Location: Sweden
I moved things around a bit. Here's a picture of the current makeshift setup:
Image
ETA: Obviously, I have to put the insert key back when using Buzz, but it's really annoying while typing.


Top
 Profile  
 
 Post subject: Re: Portability
PostPosted: Tue Jul 07, 2015 8:11 pm 
User avatar

Joined: Mon Nov 21, 2011 7:21 pm
Posts: 305
AndersBrontosaurus wrote:
not sure about portability. raspberry pi 2 I'd said to be able to run some version of win 10 but with several machines running...
Watch out. Every new version of Windows is appx. 1.5x more resource demanding than the previous one, and I don't expect Windows 10 to be an exception despite the usual hype. Windows 7 might be preferable for a small machine.

Mozart von Robot wrote:
... all they said was this: "I am sorry we are not able to support since we don’t have this model in your country."
Wow, that answer would have pissed me off. :D

I've been running Buzz on a Windows XP based eeePc, but it was Atom based (1.7 GHz), and that CPU hates floating point (audio processing), so I wouldn't recommend that for Buzz.


Top
 Profile  
 
 Post subject: Re: Portability
PostPosted: Tue Jan 15, 2019 7:50 am 
User avatar

Joined: Sat Feb 25, 2017 12:27 pm
Posts: 144
Location: South-Germany
Hi,

I was following the "potable BUZZ" idea, too.
I found a great free software named CAMEYO, which is designed to make portable versions of installers!

I made a few attempts to install BUZZ on a external USB hard drive.
I worked for VST, but not for BUZZ-generators/effects. The reason is, you can not edit the paths of the machine (like in polac VST), resulting in standard machines only. Adding machines was not possible.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 30 posts ]  Go to page Previous  1, 2

All times are UTC


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group