buzz forums

forums of the buzz
It is currently Mon Mar 27, 2017 2:28 pm

All times are UTC




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Buzz as midi slave
PostPosted: Fri Nov 18, 2016 11:01 pm 

Joined: Fri Nov 25, 2011 11:01 pm
Posts: 12
is there a way to have buzz act as a slave to an incoming midi signal and respond to the usual start/stop and clock signals?


Top
 Profile  
 
 Post subject: Re: Buzz as midi slave
PostPosted: Sat Nov 19, 2016 3:49 am 

Joined: Fri Nov 25, 2011 11:01 pm
Posts: 12
I have tried the pdoom msync but cant get it to go for more than about a bar without crashing buzz. i get the warning that the TPB is wrong but its just set at 4.


Top
 Profile  
 
 Post subject: Re: Buzz as midi slave
PostPosted: Fri Jan 13, 2017 6:28 pm 
User avatar

Joined: Wed Jul 15, 2015 2:47 pm
Posts: 12
Where does the midi signal come from?

I once tried to sync two buzz instances over midi: The slave side worked very easy, just put pdoom msync and assigned the correct midi port - there was nothing more to do.
I had a few problems on the master side to create the midi clock. At the end it worked using PVSTi. I loaded a midiOut channel through right click -> plugins, then opened the gui and switched on MIDI Clock and Transmit Song Pos. There were some differents between MTC and MMC mode, but I can't remember and didn't understand them.

So since on the client side there was nothing to do, I assume your incoming midi signal might not be what pdoom's msync needs...? TPB 4 seems fine. Are bpm on slave and midi side the same?

If you haven't, check his help file (usually in your mdb folder... C:/Users/.../Documents/Buzz/MDB/Gear/generators/P. DooM's HACK Msync.htm)


Top
 Profile  
 
 Post subject: Re: Buzz as midi slave
PostPosted: Sat Jan 14, 2017 2:51 am 

Joined: Tue May 01, 2012 2:10 am
Posts: 13
I was looking into something similar a while back:

http://forums.jeskola.net/viewtopic.php?f=2&t=2057

In the end I didn't get very far with the problem. For my purposes I just work around it.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group