buzz forums

forums of the buzz
It is currently Thu Oct 19, 2017 10:57 am

All times are UTC




Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Tue Mar 21, 2017 6:15 pm 

Joined: Mon Mar 20, 2017 9:58 pm
Posts: 53
What is the best known way of recording (real-time) or rendering from Buzz to Reaper? From my little reading in this forum so far, it seems ASIO out seems to be one way, for each output one ASIO out, then enabling those channels in Reaper, then recording there in parallel. But would this be the best way? Which other alternative or better known methods are available? Thanks in advance.

It is not a must for real-time, but real-time use case would be even more fun, just play around in Buzz, and at the same time, do your parallel mixing adjustments in Reaper, even you could do similar stuff in Buzz, let us assume here, we want to do certain things in Reaper (or another DAW). How many channels are possible at maximum via ASIO? 16 stereo channels? Or even more? For me, 16 stereo channels would be sufficient for now.

Is anyone here using a similar method? Any experiences, suggestions, tips are welcome.


Top
 Profile  
 
PostPosted: Fri Mar 24, 2017 2:24 pm 

Joined: Sat Nov 26, 2011 4:06 pm
Posts: 140
ASIO is the best way to do this you are correct. Using something like Virtual Audio Cable and ASIO4all.
(You can add more channels by adding more virtual devices.)

There is also an unsupported and old version of Buzé that can operate as a VSTi within Reaper, but in that case I think you only get one stereo out.

(Unless you are controlling Buzz live or with sequences in Reaper, I don't see the need to do this in realtime instead of just bouncing down tracks from Buzz & loading them in Reaper though. - although I have tried this setup before.)


Top
 Profile  
 
PostPosted: Fri Mar 24, 2017 2:35 pm 

Joined: Mon Mar 20, 2017 9:58 pm
Posts: 53
ags wrote:
(Unless you are controlling Buzz live or with sequences in Reaper, I don't see the need to do this in realtime instead of just bouncing down tracks from Buzz & loading them in Reaper though. - although I have tried this setup before.)

Thanks for all your replies ags.

Yes it is meant more for live use, otherwise you would need to fully arrange it in buzz. Plus, buzz and buze might not load or sound same in future. During my small tests I had already such cases, where after loading a song the preset sounds I created did not sound at all! Not sure why, maybe any problematic machines? But direct recording to Reaper would prevent such potential problems. Whatever you recorded to Reaper is saved for future listening, in exact same form.

Yes, for full arranged stuff in buzz I would do the normal bouncing method using available options.

Buze vst I did not try, single stereo out is bad, then multi-routing to Reaper would be much more interesting.


Top
 Profile  
 
PostPosted: Mon Mar 27, 2017 1:36 pm 
User avatar

Joined: Wed Nov 23, 2011 3:24 pm
Posts: 515
I was curious to see if the method I suggested would work so I gave it a try. It was very easy...

1. Set your Buzz audio driver to Polac ASIO and configure it to use ReaRoute (in the Reaper installer if you don't have it)

2. Add instances of Polac ASIO Out and route something to them. Select which ReaRoute channels to use by clicking the ASIO machine input selector. ReaRoute 1+2 will carry the master output so for routing individual machines you'll need to use ReaRoute 3 and upwards.

3. In Reaper set up your tracks to record from the appropriate ReaRoute channels. If you've done it right you should see the track meters respond to Buzz output.

I didn't try recording so there may still be issues but I don't need this so I'm not experimenting further. I have no idea if any of this will work on linux.

I've attached a simple template for the Buzz side setup. I don't know how well it will transfer to other systems but you should get the idea.


Attachments:
ReaRoute ASIO test.zip [3.12 KiB]
Downloaded 45 times
Top
 Profile  
 
PostPosted: Mon Mar 27, 2017 8:22 pm 
User avatar

Joined: Mon Feb 25, 2013 9:31 am
Posts: 416
Location: Mörkö / Groke Island
A tiny videoclip would be awesome.


Top
 Profile  
 
PostPosted: Tue Mar 28, 2017 9:49 pm 
User avatar

Joined: Wed Nov 23, 2011 3:24 pm
Posts: 515
AndersBrontosaurus wrote:
A tiny videoclip would be awesome.

Sorry, can't help you there. It really is pretty easy though. :)


Top
 Profile  
 
PostPosted: Tue Mar 28, 2017 10:15 pm 

Joined: Mon Mar 20, 2017 9:58 pm
Posts: 53
If ReaRoute and ASIO via wineasio would already work, it would be probably easy. :) Have to fight with those problems first.


Top
 Profile  
 
PostPosted: Mon Apr 03, 2017 1:51 am 

Joined: Tue Dec 06, 2011 6:54 pm
Posts: 215
I think it would also be possible to send audio thru the mixer software of your sound card Multi I/O . To channels in reaper with polacs asio out I have a focusrite and it can do that. It would be just a matter of syncing the 2 together Play stop record.Then save everything as templates in each respective software


Top
 Profile  
 
PostPosted: Tue Apr 04, 2017 4:46 am 

Joined: Tue May 01, 2012 2:10 am
Posts: 14
ags wrote:
There is also an unsupported and old version of Buzé that can operate as a VSTi within Reaper, but in that case I think you only get one stereo out.


!!!

Any more info on this, e.g. links? This has been my white whale for some time - getting a tracker I like working as a vsti in Reaper has turned out to be harder than I would have thought.

<edit>

Ok, I answered my own question:
http://batman.no/buze/beta/

Though according to the readme it's very beta and, yeah, only stereo out. I'll keep dreaming.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group