Help please! Generators play the wrong notes.
Posted: Mon Oct 30, 2017 6:05 am
Hello folks! I seek your guidance once more.
I'm encountering a very strange problem with Buzz.
My VSTs are operating normally, but when I use a native Buzz generator, the actual pitch does not match the note I type in the sequence. I confirmed this using a tuner, and in fact everything is sounding a half-step higher than it should be.
The problem seemed to come out of nowhere, and if there is a setting somewhere you can adjust these things, I have yet to find it. I seem to remember some sort of "global tuning" setting, but that may have only been in Old Buzz, and I was under the impression that was meant for much finer adjustments, so I figure it wouldn't be so easy to accidentally get a half-step too high....
So I'm hoping someone out there has had the same experience? Or knows something I am missing? All production is at a halt until this is fixed, and at this point I'm pretty much stumped.
Thanks in advance!
I'm encountering a very strange problem with Buzz.
My VSTs are operating normally, but when I use a native Buzz generator, the actual pitch does not match the note I type in the sequence. I confirmed this using a tuner, and in fact everything is sounding a half-step higher than it should be.
The problem seemed to come out of nowhere, and if there is a setting somewhere you can adjust these things, I have yet to find it. I seem to remember some sort of "global tuning" setting, but that may have only been in Old Buzz, and I was under the impression that was meant for much finer adjustments, so I figure it wouldn't be so easy to accidentally get a half-step too high....
So I'm hoping someone out there has had the same experience? Or knows something I am missing? All production is at a halt until this is fixed, and at this point I'm pretty much stumped.
Thanks in advance!