buzz forums

forums of the buzz
It is currently Sat Feb 16, 2019 12:29 pm

All times are UTC




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Mon Feb 11, 2019 9:37 pm 

Joined: Tue Dec 06, 2016 3:52 am
Posts: 12
Ope! It's me again. In my quest of mixing, there's a few machines I'm left wondering about...

HD Saturation is a great machine and I use it in almost every track. I've found zero documentation on it though, just wondering what type of saturation it is... Doing my homework, most saturators out there are modeled to emulate tube or tape saturation, and either one should be used in different situations. It's also labeled as "StereoSat", so I was wondering if that implied that it had any sort of multi-channel or stereo widening stuff going on.

Arguru Inversor seems to be the only polarity flip I can find in Buzz native, and the search for free VSTs has been less than fruitful. This is a problem, because Arguru makes some god-awful clicks that ruin the song. The indicator stays lit at all times, as if it always has some sort of signal passing through it, whereas the machine before in the chain goes off and on normally. Thinking maybe it could be something wrong on my end, but I would rather just replace it with something that works better.


Top
 Profile  
 
PostPosted: Mon Feb 11, 2019 10:34 pm 
User avatar

Joined: Wed Mar 26, 2014 7:07 am
Posts: 309
Cool! I haven't tried HD Saturation, I'll have to give it a test.

For a phase reverse I think the best is IX strip. It's very accurate and reliable. If you split the signal and phase reverse half of it and then recombine at equal gain absolutely nothing comes out. You would think that would be the case with every phase reverse plugin but no...


Top
 Profile  
 
PostPosted: Mon Feb 11, 2019 10:45 pm 
User avatar

Joined: Sat May 11, 2013 4:10 am
Posts: 45
Cheapo Negative is the inverter I've used most over the years, but recently I've started using Joachim's Converter Tool, which includes an inverter as well as some other handy stuff like gain, DC removal, Mid/Side conversion etc. It hasn't given me any troubles so far, though the true "zero" position for gain is actually -3.1dB. Hadn't even thought to use IX Strip, but I'll have to try that one out too.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group