Page 1 of 1

everything is a noise burst, help

Posted: Sun Jun 18, 2017 3:20 am
by unslept_em
I'm surprised I'm not deaf after that experience, wow

new to buzz tracker, would like advice.

edit: have tried both x86 and x64 builds. no luck with either

Re: everything is a noise burst, help

Posted: Sun Jun 18, 2017 3:59 am
by szaszhareen
what audio driver are you using?

Re: everything is a noise burst, help

Posted: Mon Jun 26, 2017 12:01 pm
by mcbpete
...and what machines ?
...Are you using imported samples or just the synths/generators ?

If you're using imported samples what sample/bit rate are they at and what machine are you using to play them back with ?

Re: everything is a noise burst, help

Posted: Sun Jul 16, 2017 7:44 pm
by unslept_em
sorry for the very late response.

WASAPI is the only option I have to use. I'm attempting to use machines. let's say for example I pick organ. I put that through to master, I attempt to enter a note into the tracker, and a noise burst unfortunately comes out every time. for other machines, it's a coin toss whether they work at all or put out a sustained noise burst

other than that, I'm using realtek hd for audio, though I'm not sure how relevant that info is.

got startup info from the debug console, in case it helps.

Code: Select all

00:00 [Startup] Buzz build 1503 (MI_VERSION 66)
00:00 [Startup] CreateProcess 'C:\Users\Hypothet\AppData\Local\Jeskola\Buzz_x64\bin32\BuzzEngine32.exe'
00:00 [Engine32] Init
00:00 [Startup] Load 'BuzzGUI.dll'
00:00 [Startup] Load 'avrt.dll'
00:00 [Engine] Using 8 threads in multithreaded mode
00:00 [Engine] Worker thread 0 affinity set to 1
00:00 [Engine] Worker thread 0 priority 15
00:00 [Engine] Worker thread 1 affinity set to 2
00:00 [Engine] Worker thread 1 priority 15
00:00 [Engine] Worker thread 2 affinity set to 4
00:00 [Engine] Worker thread 2 priority 15
00:00 [Engine] Worker thread 0 priority after AvSetMmThreadCharacteristics 18
00:00 [Engine] Worker thread 1 priority after AvSetMmThreadCharacteristics 18
00:00 [Engine] Worker thread 2 priority after AvSetMmThreadCharacteristics 18
00:00 [Engine] Worker thread 4 affinity set to 16
00:00 [Engine] Worker thread 4 priority 15
00:00 [Engine] Worker thread 4 priority after AvSetMmThreadCharacteristics 18
00:00 [Engine] Worker thread 6 affinity set to 64
00:00 [Engine] Worker thread 6 priority 15
00:00 [Engine] Worker thread 6 priority after AvSetMmThreadCharacteristics 18
00:00 [Engine] Worker thread 7 affinity set to 128
00:00 [Engine] Worker thread 7 priority 15
00:00 [Engine] Worker thread 7 priority after AvSetMmThreadCharacteristics 18
00:00 [Engine] Worker thread 3 affinity set to 8
00:00 [Engine] Worker thread 3 priority 15
00:00 [Engine] Worker thread 3 priority after AvSetMmThreadCharacteristics 18
00:00 [Engine] Worker thread 5 affinity set to 32
00:00 [Engine] Worker thread 5 priority 15
00:00 [Engine] Worker thread 5 priority after AvSetMmThreadCharacteristics 18
00:00 [GUI] RenderCapability::Tier == 2
00:00 [Startup] ReadAudioDriverList
00:00 [ADM] Loaded driver 'wo_wasapi.dll'
00:00 [ADM] [WASAPI] New Instance
00:00 [ADM] [WASAPI] Initialize
00:00 [Engine32] DSP_Init
00:00 [Engine] Audio thread priority 15
00:00 [Engine] Audio thread priority after AvSetMmThreadCharacteristics 15
00:00 [GUI] Begin LoadTheme '<default>'
00:00 [GUI] Create toolbar
00:00 [GUI] Create parameter window
00:00 [GUI] Create machine view
00:01 [GUI] Create wavetable view
00:01 [GUI] Create sequence editor
00:01 [WPFTraceListener] BindingExpression path error: 'BindableSettings' property not found on 'object' ''PatternEditor' (Name='')'. BindingExpression:Path=BindableSettings.BackgroundImage; DataItem='PatternEditor' (Name=''); target element is 'Border' (Name=''); target property is 'NoTarget' (type 'Object')
00:01 [WPFTraceListener] BindingExpression path error: 'BindableSettings' property not found on 'object' ''PatternEditor' (Name='')'. BindingExpression:Path=BindableSettings.BackgroundImage; DataItem='PatternEditor' (Name=''); target element is 'Border' (Name=''); target property is 'NoTarget' (type 'Object')
00:01 [WPFTraceListener] BindingExpression path error: 'BindableSettings' property not found on 'object' ''PatternEditor' (Name='')'. BindingExpression:Path=BindableSettings.BackgroundImage; DataItem='PatternEditor' (Name=''); target element is 'Border' (Name=''); target property is 'NoTarget' (type 'Object')
00:01 [PE] Loaded 'C:\Users\Hypothet\AppData\Local\Jeskola\Buzz_x64\PEKeys.xml'
00:01 [WPFTraceListener] BindingExpression path error: 'DecreaseCommand' property not found on 'object' ''PatternControl' (Name='patternControl')'. BindingExpression:Path=DecreaseCommand; DataItem='PatternControl' (Name='patternControl'); target element is 'MenuItem' (Name=''); target property is 'Command' (type 'ICommand')
00:01 [WPFTraceListener] BindingExpression path error: 'IncreaseCommand' property not found on 'object' ''PatternControl' (Name='patternControl')'. BindingExpression:Path=IncreaseCommand; DataItem='PatternControl' (Name='patternControl'); target element is 'MenuItem' (Name=''); target property is 'Command' (type 'ICommand')
00:01 [WPFTraceListener] BindingExpression path error: 'InterpolateCommand' property not found on 'object' ''PatternControl' (Name='patternControl')'. BindingExpression:Path=InterpolateCommand; DataItem='PatternControl' (Name='patternControl'); target element is 'MenuItem' (Name=''); target property is 'Command' (type 'ICommand')
00:01 [WPFTraceListener] BindingExpression path error: 'InterpolateCommand' property not found on 'object' ''PatternControl' (Name='patternControl')'. BindingExpression:Path=InterpolateCommand; DataItem='PatternControl' (Name='patternControl'); target element is 'MenuItem' (Name=''); target property is 'Command' (type 'ICommand')
00:01 [WPFTraceListener] BindingExpression path error: 'RotateCommand' property not found on 'object' ''PatternControl' (Name='patternControl')'. BindingExpression:Path=RotateCommand; DataItem='PatternControl' (Name='patternControl'); target element is 'MenuItem' (Name=''); target property is 'Command' (type 'ICommand')
00:01 [WPFTraceListener] BindingExpression path error: 'RotateCommand' property not found on 'object' ''PatternControl' (Name='patternControl')'. BindingExpression:Path=RotateCommand; DataItem='PatternControl' (Name='patternControl'); target element is 'MenuItem' (Name=''); target property is 'Command' (type 'ICommand')
00:01 [WPFTraceListener] BindingExpression path error: 'WriteStateCommand' property not found on 'object' ''PatternControl' (Name='patternControl')'. BindingExpression:Path=WriteStateCommand; DataItem='PatternControl' (Name='patternControl'); target element is 'MenuItem' (Name=''); target property is 'Command' (type 'ICommand')
00:01 [GUI] End LoadTheme '<default>'
00:01 [Startup] Load Machines
00:01 [MM] Read 'C:\Users\Hypothet\AppData\Local\Jeskola\Buzz_x64\Gear\gear_defaults.xml'
00:01 [MM] Load internal machine pack
00:01 [MM] Add machine 'Wave Input'
00:01 [MM] Add machine 'Wave Output'
00:01 [MM] Add machine 'Jeskola Mixer'
00:01 [MM] Add machine 'Jeskola AuxSend'
00:01 [MM] Add machine 'Jeskola Aux Return'
00:01 [MM] Add machine 'Jeskola Reverb 2'
00:01 [MM] Add machine 'Jeskola Groove 1'
00:01 [MM] Add machine 'Jeskola Modulator'
00:01 [MM] Add machine 'MultiIOTest'
00:01 [MM] Add machine 'Jeskola Crossover'
00:01 [MM] Add machine 'Jeskola Channel Mixer'
00:01 [MM] Add machine 'Jeskola Filter 3'
00:01 [MM] Add machine 'Jeskola Qsine'
00:01 [MM] Add machine 'Jeskola Qsamo'
00:01 [MM] Add machine 'Jeskola Relativion'
00:01 [MM] Add machine 'Jeskola Loop Recorder'
00:01 [MM] Add machine 'Jeskola Arpeggiator'
00:01 [MM] Search 'C:\Users\Hypothet\AppData\Local\Jeskola\Buzz_x64\Gear\'
00:01 [MM] Search 'C:\Users\Hypothet\AppData\Local\Jeskola\Buzz_x64\Gear\Generators\'
00:01 [MM] Add DLL 'Jeskola Pattern XP'
00:01 [MM] Add DLL 'Jeskola Pianoroll'
00:01 [MM] Add DLL 'Jeskola Sine Synth'
00:01 [MM] Search 'C:\Users\Hypothet\AppData\Local\Jeskola\Buzz_x64\Gear\Generators\'
00:01 [MM] Add DLL 'Jeskola Bass 2'
00:01 [MM] Add DLL 'Jeskola Bass 3'
00:01 [MM] Add DLL 'Jeskola Bass'
00:01 [MM] Add DLL 'Jeskola Live'
00:01 [MM] Add DLL 'Jeskola Noise Generator'
00:01 [MM] Add DLL 'Jeskola Note Matrix'
00:01 [MM] Add DLL 'Jeskola Organ'
00:01 [MM] Add DLL 'Jeskola Tracker'
00:01 [MM] Add DLL 'Jeskola Trilok'
00:01 [MM] Search 'C:\Users\Hypothet\AppData\Local\Jeskola\Buzz_x64\Gear\Effects\'
00:01 [MM] Add DLL 'Jeskola Limiter'
00:01 [MM] Search 'C:\Users\Hypothet\AppData\Local\Jeskola\Buzz_x64\Gear\Effects\'
00:01 [MM] Add DLL 'Jeskola Chorus'
00:01 [MM] Add DLL 'Jeskola Cross Delay'
00:01 [MM] Add DLL 'Jeskola Delay'
00:01 [MM] Add DLL 'Jeskola Distortion'
00:01 [MM] Add DLL 'Jeskola EQ-3'
00:01 [MM] Add DLL 'Jeskola Filter 2'
00:01 [MM] Add DLL 'Jeskola Filter'
00:01 [MM] Add DLL 'Jeskola Flanger'
00:01 [MM] Add DLL 'Jeskola Gain'
00:01 [MM] Add DLL 'Jeskola NiNjA dElaY'
00:01 [MM] Add DLL 'Jeskola Raverb'
00:01 [MM] Add DLL 'Jeskola Reverb'
00:01 [MM] Add DLL 'Jeskola Stereo Reverb'
00:01 [MM] Add DLL 'Jeskola Wave Shaper'
00:01 [MM] LoadLibrary 'C:\Users\Hypothet\AppData\Local\Jeskola\Buzz_x64\Gear\Generators\Jeskola Pattern XP.x64.dll'
00:01 [MM] LoadLibrary 'C:\Users\Hypothet\AppData\Local\Jeskola\Buzz_x64\Gear\Generators\Jeskola Pianoroll.x64.dll'
00:01 [Startup] Read Wave Tree
00:01 [Startup] Initialize MIDI Input
00:01 [Engine32] BuzzInit
00:01 [Startup] Finished
00:01 OnDataContextChanged
00:02 [WPFTraceListener] Cannot find governing FrameworkElement or FrameworkContentElement for target element. BindingExpression:Path=Buzz.ThemeColors[MV Background]; DataItem=null; target element is 'SolidColorBrush' (HashCode=54095401); target property is 'Color' (type 'Color')
00:02 [WPFTraceListener] Cannot find governing FrameworkElement or FrameworkContentElement for target element. BindingExpression:Path=MachineGraph.Buzz.ThemeColors[MV Line]; DataItem=null; target element is 'SolidColorBrush' (HashCode=56648283); target property is 'Color' (type 'Color')
00:02 [WPFTraceListener] Cannot find governing FrameworkElement or FrameworkContentElement for target element. BindingExpression:Path=MachineLEDOnColor; DataItem=null; target element is 'SolidColorBrush' (HashCode=64124362); target property is 'Color' (type 'Color')
00:02 CheckForUpdates 27 ms
00:02 [BuzzUpdate] No updates available.
I'm running buzz on windows 10
I've tried compatibility mode for vista, windows 7, and windows 8.
I've messed with WASAPI config to see if exclusive mode did anything (it didn't) and toggled Poll even though I have no idea what that does. my only other thing to try would be to mess with buffer size but WASAPI config won't let me mess with that.

Re: everything is a noise burst, help

Posted: Thu Jul 20, 2017 12:17 pm
by unslept_em
I've tried using asio4all to try using a different driver, but buzz won't recognize it

Re: everything is a noise burst, help

Posted: Fri Jul 21, 2017 10:53 am
by Buzztler
I've tried using asio4all to try using a different driver, but buzz won't recognize it
Did you install Polacs VST-Loader? It comes with options in the "menu" to select the sound driver after install and also has Polac's ASIO on board ...

Re: everything is a noise burst, help

Posted: Sat Jul 22, 2017 7:22 am
by szaszhareen
sounds like you installed 64 bit buzz since you aren't seeing asio4all in preferences. can you install 32 bit buzz, and see if you still have the bursts?

if so, can you open view>preferences>waveoutput>config and post a screenshot of wasapi config? You can do this for asio4all as well, since it should appear once you install 32 bit buzz.

compatibility mode is not really necessary here as the problem is not with the buzz application itself but sounds like a problem with the waveoutput, like an invalid samplerate or driver.

maybe you are missing a prereq like a version of vcredist. I have in programs and features msvcredist 9-14, buzz uses some and machines use others. posting the versions of vcredist (microsoft visual c++ redistributable) might help us as well.