Have you tried using the 32bit version of the VSTi - Maybe there's a problem with the 64->32 bit VSTi bridge ?CyberMag wrote:Hello I have found today strange bug with omnisphere again.
Buzz.exe 32bit
omnisphere 64bit
new pvst beta (updated 03-Dec-2023)
Re: new pvst beta (updated 05-Dec-2012)
Re: new pvst beta (updated 05-Dec-2012)
May be. But I can't reproduce bug again. During the previous work session I have 5 backup files. All of them have default preset for second omnisphere instance.mcbpete wrote: Have you tried using the 32bit version of the VSTi - Maybe there's a problem with the 64->32 bit VSTi bridge ?
I have selected the desired preset again and save the project. On the next load all is OK, i can hear the sound from the second instance.
It seems that the bug is hard reproducable. In some specific case the preset is dropped to default...
But unfortunately I can't find straight reproduction procedure...
Re: new pvst beta (updated 05-Dec-2012)
I have reproduced the issue with preset one more time. The sequence:
1. Use ominsphere x64 bit until it crashed for some reason
2. Press save ( i guess only vst64.exe process is crashed so I am able to press the save in buzz ).
3. Restart the buzz, load the song again -> the preset of the omnisphere is broken and is set to default one.
Could you please deny the saving if bridge has crashed?
1. Use ominsphere x64 bit until it crashed for some reason
2. Press save ( i guess only vst64.exe process is crashed so I am able to press the save in buzz ).
3. Restart the buzz, load the song again -> the preset of the omnisphere is broken and is set to default one.
Could you please deny the saving if bridge has crashed?
Re: new pvst beta (updated 05-Dec-2012)
One more reproduction sequence of the crash of the vst64.ext:
1. Create 3 instances of the omnisphere64 bit inside 32bit host. Select non default presets on each.
2. Select one instance and save/load fxp preset 2-3 times. As a result vst64.exe is crashed.
1. Create 3 instances of the omnisphere64 bit inside 32bit host. Select non default presets on each.
2. Select one instance and save/load fxp preset 2-3 times. As a result vst64.exe is crashed.
simple omnishphere crash reproduction ( may help to fix it )
Hello Polac!
I have found simple sequence of actions which reproduces the crash of the omnisphere.
1. Create a 64bit instance of omnisphere inside 32bit buzz. -> -> check the step1 in the attached shot
2. Open synt GUI.
2. Click on utility. Wait while menu will appear -> check the step2 in the attached shot
3. Press ESC key -> got screen as in the step3 -> vst64 has crashed
I have found simple sequence of actions which reproduces the crash of the omnisphere.
1. Create a 64bit instance of omnisphere inside 32bit buzz. -> -> check the step1 in the attached shot
2. Open synt GUI.
2. Click on utility. Wait while menu will appear -> check the step2 in the attached shot
3. Press ESC key -> got screen as in the step3 -> vst64 has crashed
Re: new pvst beta (updated 05-Dec-2012)
Hi CyberMag, sorry for the delayed reply I'm quite busy lately. I'll take a look what happens if the x64 process crashes and one saves later on the song. It would be best if a could check out Omnisphere by myself, however i don't think that there is a demo version out, well I could try a warezed version for testing, let's see.
Re: new pvst beta (updated 05-Dec-2012)
Suggestion:
Could you build into the VSTi Wrapper a few (or user selected amount) of LFO's that can be beat sync'd or free running to any parameter in the loaded synth/effect?
Like the VSTi Wrapper creates a drop down list of the Synths or FX Knobs\Parameter names automatically... That can then be modulated by an assigned LFO built into the VSTi Wrapper.
Possible? I think it would be revolutionary...
Could you build into the VSTi Wrapper a few (or user selected amount) of LFO's that can be beat sync'd or free running to any parameter in the loaded synth/effect?
Like the VSTi Wrapper creates a drop down list of the Synths or FX Knobs\Parameter names automatically... That can then be modulated by an assigned LFO built into the VSTi Wrapper.
Possible? I think it would be revolutionary...
Re: new pvst beta (updated 05-Dec-2012)
peerLFO ?
Re: new pvst beta (updated 05-Dec-2012)
There is a track command to do the lfo. It modulates the parameter assigned to a track.vaisnava wrote:Suggestion:
Could you build into the VSTi Wrapper a few (or user selected amount) of LFO's that can be beat sync'd or free running to any parameter in the loaded synth/effect?
Like the VSTi Wrapper creates a drop down list of the Synths or FX Knobs\Parameter names automatically... That can then be modulated by an assigned LFO built into the VSTi Wrapper.
Possible? I think it would be revolutionary...
Re: new pvst beta (updated 05-Dec-2012)
Polac, many thanks for your VST loader. It's a magnificent piece of work.
Re: new pvst beta (updated 05-Dec-2012)
Agree. Incredible amount of functionality.IXix wrote:Polac, many thanks for your VST loader. It's a magnificent piece of work.
@vaisnava: http://www.xlutop.com/buzz/ if you haven't already taken a gander.
Re: new pvst beta (updated 05-Dec-2012)
1+ Couldn't agree more.IXix wrote:Polac, many thanks for your VST loader. It's a magnificent piece of work.
Re: new pvst beta (updated 05-Dec-2012)
Hello, I've been encountering a peculiar problem with the loaders: whenever I click and hold on any of the knobs on any VST at all, when I am gradually changing some value for instance, after a few seconds the knob freezes and stops budging and once I let go of the mouse the GUI of the plugin disappears from the screen. To get around that I've been holding for a few seconds, then letting go, then clicking on the knob again and continuing to tweak. And some issues with VST3 versions of Fab Filter plugins, the modulation sections do not pull down as they do in regular 2.4 versions, in some cases the VST3 plugs come up in an empty window. Also VST3 version of u-he's Diva crashes when I try to open up an instance. Not sure what is up, maybe it's got something to do with those manufacturers and not the loaders. Not a big deal as everything else works like a charm.
Re: new pvst beta (updated 05-Dec-2012)
Hi, the knob freezing cannot be fixed properly, it's an issue with older vst plugins and win7. While tweaking a knob/fader these vsts are blocking the message loop of windows completely, win7 detects this and grays out a window or closes it after some time. This didn't happen with earlier windows versions.Tiadiad wrote:Hello, I've been encountering a peculiar problem with the loaders: whenever I click and hold on any of the knobs on any VST at all, when I am gradually changing some value for instance, after a few seconds the knob freezes and stops budging and once I let go of the mouse the GUI of the plugin disappears from the screen. To get around that I've been holding for a few seconds, then letting go, then clicking on the knob again and continuing to tweak. And some issues with VST3 versions of Fab Filter plugins, the modulation sections do not pull down as they do in regular 2.4 versions, in some cases the VST3 plugs come up in an empty window. Also VST3 version of u-he's Diva crashes when I try to open up an instance. Not sure what is up, maybe it's got something to do with those manufacturers and not the loaders. Not a big deal as everything else works like a charm.
The u-he vst3 problem was known to me it happens also with Ace or Podolski here. Yesterday I did some debugging and found out whats going wrong, I'll upload a fix soon. I didn't check the fabfilters yet but I'll take a look.
Re: new pvst beta (updated 08-Jun-2013)
There's now a new pattern mode in the buzz wrappers, it's unfinished as you cannot save yet. It can be activated via ctrl+tab or via rightclickmenu->settings.
Re: new pvst beta (updated 08-Jun-2013)
Your work is truly admirable !! thank you
Last edited by thOke on Sat Jun 15, 2013 4:10 am, edited 1 time in total.
Re: new pvst beta (updated 08-Jun-2013)
Thank you so very much Frank, the new MME driver now supports all samplerates and bitrates and it truly is awesome to have MME driver back. Thank you so much again.
Re: new pvst beta (updated 08-Jun-2013)
Thank you for the great update Polac! My VST3's are fully operational now.
Re: new pvst beta (updated 08-Jun-2013)
Thanks Polac for the update, your vst loader is truly the best I've seen in any DAW. What exactly is the purpose of this new pattern mode though? I've figured out how to bring it up but don't really understand a reason for using it? Also I've always wondered, what does the "Inertia Fix" do in the preferences?polac wrote:There's now a new pattern mode in the buzz wrappers, it's unfinished as you cannot save yet. It can be activated via ctrl+tab or via rightclickmenu->settings.
Re: new pvst beta (updated 08-Jun-2013)
I love the new pattern mode, being able to work on several patterns with a better visual workflow, even bettern on dual/multi screen.