buzz forums
http://forums.jeskola.net/

new pvst beta (updated 29-Apr-2018)
http://forums.jeskola.net/viewtopic.php?f=3&t=7
Page 3 of 18

Author:  Joachip [ Tue Jan 31, 2012 5:07 pm ]
Post subject:  Re: new pvst beta (updated 28-Jan-2012)

Doggone it. There it is!

I should have checked the "old-school/FT2" section of that manual. Apparently ".. 1080" in pvst is the same as "30 80" in matilde tracker. Yes, you have to leave the Track Command column empty it seems. I hadn't figured out there were commands hidden in the value column. In case I'm not the only one who hasn't discovered this, here's an example of how to randomize an external MIDI instrument or a VST:

Image

1030 = "play note in only rare cases"
1080 = "play in 50% of all cases"
10D0 = "play the note almost every time"

Author:  spag [ Thu Feb 02, 2012 6:39 pm ]
Post subject:  Re: new pvst beta (updated 28-Jan-2012)

Before all, I want to thank you for your vst loader.

I have some little problems with polac vst beta17 version (I use buzz v1145 under winxp) and I don't know if anybody else has yet reported those problems.
The first happen when I try to load a psycle machine: it don't load and the same when I try to load a ladspa effect. I have substituted the ladspa and psycle dll of beta17 with the corresponding dll from the earlier version (beta16) and then the machines (effects and psycle synths) load perfectly.

For the second problem I'm just curious about the loading of some vsti (in particular some macaw synth vsti) in buzz under winxp. I just want to report that because I don't know if it is a vst-loader problem or a problem of the vsti itself.

Can You also tell me something about some psycle machine that have multiple "pages" for setting the oscillator and only the first of these is shown (the following aren't accessible) in polac loader.

If you can tell me something of what you think about those little problems, without worrying too much or engaging too much of your time, I will be very happy.

Sorry for my english and Thank you again for the loader and for your attention.

Author:  boombaxx [ Thu Feb 02, 2012 6:54 pm ]
Post subject:  Re: new pvst beta (updated 28-Jan-2012)

Thanks for sorting that bug with seperate process song loads now :D

Author:  Buzztler [ Fri Feb 03, 2012 3:36 pm ]
Post subject:  Re: new pvst beta (updated 28-Jan-2012)

Thank you very, very much Xlutop for the polac-loader version "17b". Live-recordings still work very good and even better somehow with your provided "Audio-in". Nice 440 hz tone test-"pad" for setup of the sound driver, therewith a quick test if ASIO works, is able.
Just one question: if I have a look about the version number of VST-loader - under properties - it says still "15b" I can use the new awesome Wavetable :o :shock: :o , for example with matilde-tracker ... so it seems I work with the new version the loader? Is the version hint on 15b just a hangover in vst-loader or is it an error in my setup? :oops:
Thx again, please keep up your outstanding work ... (!)

Author:  polac [ Sat Feb 04, 2012 8:04 pm ]
Post subject:  Re: new pvst beta (updated 28-Jan-2012)

Quote:
I have some little problems with polac vst beta17 version (I use buzz v1145 under winxp) and I don't know if anybody else has yet reported those problems.
The first happen when I try to load a psycle machine: it don't load and the same when I try to load a ladspa effect. I have substituted the ladspa and psycle dll of beta17 with the corresponding dll from the earlier version (beta16) and then the machines (effects and psycle synths) load perfectly.


Hi, they are working here, both ladspa and psycle. Sometimes these plugins rely on external libraries, you have to copy them to your buzz folder then(or to the buzz\bin64 folder when using x64 psycle/ladspa versions).

Quote:
Can You also tell me something about some psycle machine that have multiple "pages" for setting the oscillator and only the first of these is shown (the following aren't accessible) in polac loader.
Quote:


I think there were some hidden "features" not documented by the psycle devs, this is possibly one of them.

Quote:
ust one question: if I have a look about the version number of VST-loader - under properties - it says still "15b" I can use the new awesome Wavetable :o :shock: :o , for example with matilde-tracker ... so it seems I work with the new version the loader? Is the version hint on 15b just a hangover in vst-loader or is it an error in my setup? :oops:
Thx again, please keep up your outstanding work ... (!)


If you redownload again there should show up a 18b now, just to be on the safe side :mrgreen:

Author:  polac [ Sun Feb 05, 2012 7:08 pm ]
Post subject:  Re: new pvst beta (updated 24-Jan-2012)

wde wrote:
I think there is a small bug regarding synth edit(?) instruments and loading a song: at least for ME80, song loads fine, ME80 displays correct preset in the preset menu, but actually the first preset is active when the instrument is played. Maybe the preset change sequence after loading a song is not finished correctly?


Thanks for the info, i can confirm that there is a bug, but only if you have selected "only save selected program to song" option in preferences, otherwise loading should work fine if "save complete bank to song" is selected (which is the default setting). What happens is that the program chunk gets always loaded to the first bank slot, I'm asking me since when this is broken.

Author:  mute [ Sun Feb 05, 2012 9:25 pm ]
Post subject:  Re: new pvst beta (updated 28-Jan-2012)

Any chance you've looked into this? I can supply a .bmx when I get home tonight if it isn't happening for you

mute wrote:
^--- Commands are in PVST's help file, the command for probability is 10.. just like in Mtrk (and most trackers of the past really.. stemmed from ProTracker).

I've run across a bug in PVST since the update with the plugin Drumatic 3 (free drum machine I use alot)

For some reason, when you play a kick/bass note aka C-3, the output goes insane (clipped/loud). It doesn't happen with the rest of the Kit.. so its really odd.

I've tried all the various settings and turned multithreading on and off in Buzz and in PVST, but no luck. This doesn't happen on the older PVSTs, no matter what Buzz's settings are.

http://www.e-phonic.com/plugins/drumatic3.php

Author:  strobotone [ Mon Feb 06, 2012 11:30 am ]
Post subject:  Re: new pvst beta (updated 28-Jan-2012)

had the same issue with drumatic 3 too.
disabling multithreading for this vst solved the issue most of the time.
however, when loading a bmx containing the machine the issue came up again.
i found only one workaround:
1) create a second instance of drumatic in the same bmx
2) save and reload the preset of the first drumatic if the burst still occurs.

Author:  mute [ Mon Feb 06, 2012 2:13 pm ]
Post subject:  Re: new pvst beta (updated 28-Jan-2012)

PXP Row Quantization would be useful as a global option in addition to the F4.. I pretty much always enable it when recording midi. If it were global I could set it to be on all the time, and then only disable it when needed.

Thanks for double checking drumatic3 strob

Author:  Buzztler [ Mon Feb 06, 2012 3:39 pm ]
Post subject:  Re: new pvst beta (updated 28-Jan-2012)

Downloaded pvst17b again now it shows version 18 in vsti-loader :) but still 10 in VST-loader ;) but there are more important things, therewith you are right ... 8-)

Author:  aKa [ Sat Feb 18, 2012 10:36 am ]
Post subject:  Re: new pvst beta (updated 28-Jan-2012)

Kudos to Polac !

There can never be to much smileys in this thread.

:lol:

Author:  polac [ Sun Feb 19, 2012 10:29 am ]
Post subject:  Re: new pvst beta (updated 28-Jan-2012)

mute wrote:
Any chance you've looked into this? I can supply a .bmx when I get home tonight if it isn't happening for you

mute wrote:
^--- Commands are in PVST's help file, the command for probability is 10.. just like in Mtrk (and most trackers of the past really.. stemmed from ProTracker).

I've run across a bug in PVST since the update with the plugin Drumatic 3 (free drum machine I use alot)

For some reason, when you play a kick/bass note aka C-3, the output goes insane (clipped/loud). It doesn't happen with the rest of the Kit.. so its really odd.

I've tried all the various settings and turned multithreading on and off in Buzz and in PVST, but no luck. This doesn't happen on the older PVSTs, no matter what Buzz's settings are.

http://www.e-phonic.com/plugins/drumatic3.php


Yes I've checked it a few days ago, but no problems here for me on song load, I tried the out machines and also the built-in multi io from buzz. So an example bmx might be helpful.

Author:  Evelon [ Sun Feb 19, 2012 11:12 am ]
Post subject:  Re: new pvst beta (updated 18-Feb-2012)

Thank you for the updates, Polac!!

Btw, is the "strange GUI freezes" on some VST/VSTi (such as the free Roughrider, the commercial Dada Life Sausage Fattener, ApQualizr, etc) a PVST issue, Buzz issue or graphic driver issue?

Author:  polac [ Sun Feb 19, 2012 11:46 am ]
Post subject:  Re: new pvst beta (updated 18-Feb-2012)

Evelon wrote:
Thank you for the updates, Polac!!

Btw, is the "strange GUI freezes" on some VST/VSTi (such as the free Roughrider, the commercial Dada Life Sausage Fattener, ApQualizr, etc) a PVST issue, Buzz issue or graphic driver issue?


Yes the roughrider gui gets quite sluggish when running it in a separate process, however if you disable the "embed vst gui" in the separate process options it works fine here again.

Author:  Buzztler [ Sun Feb 19, 2012 1:43 pm ]
Post subject:  Re: new pvst beta (updated 19-Feb-2012)

I checked matilde tracker 1.10rc1 with your overloader 17b and the wavetable is "greyed out" I'm, not able to reach it with this version :( ... :lol:

Author:  Evelon [ Sun Feb 19, 2012 5:00 pm ]
Post subject:  Re: new pvst beta (updated 18-Feb-2012)

polac wrote:
Evelon wrote:
Thank you for the updates, Polac!!

Btw, is the "strange GUI freezes" on some VST/VSTi (such as the free Roughrider, the commercial Dada Life Sausage Fattener, ApQualizr, etc) a PVST issue, Buzz issue or graphic driver issue?


Yes the roughrider gui gets quite sluggish when running it in a separate process, however if you disable the "embed vst gui" in the separate process options it works fine here again.

Cured! Thank you, again!

edit: it seems to be sporadically cured.

Author:  thOke [ Sun Feb 19, 2012 5:12 pm ]
Post subject:  Re: new pvst beta (updated 19-Feb-2012)

Buzztler wrote:
I checked matilde tracker 1.10rc1 with your overloader 17b and the wavetable is "greyed out" I'm, not able to reach it with this version :( ... :lol:


i think the only difference of matilde 3-1.10rc1 is 'native' multi-out support ... you can already use polac (multi-)out with 2-1.9rc8 so why do you want to use 3-1.10rc1
with the polac adapter ?

Author:  mute [ Sun Feb 19, 2012 9:22 pm ]
Post subject:  Re: new pvst beta (updated 28-Jan-2012)

polac wrote:
mute wrote:
Any chance you've looked into this? I can supply a .bmx when I get home tonight if it isn't happening for you

mute wrote:
^--- Commands are in PVST's help file, the command for probability is 10.. just like in Mtrk (and most trackers of the past really.. stemmed from ProTracker).

I've run across a bug in PVST since the update with the plugin Drumatic 3 (free drum machine I use alot)

For some reason, when you play a kick/bass note aka C-3, the output goes insane (clipped/loud). It doesn't happen with the rest of the Kit.. so its really odd.

I've tried all the various settings and turned multithreading on and off in Buzz and in PVST, but no luck. This doesn't happen on the older PVSTs, no matter what Buzz's settings are.

http://www.e-phonic.com/plugins/drumatic3.php


Yes I've checked it a few days ago, but no problems here for me on song load, I tried the out machines and also the built-in multi io from buzz. So an example bmx might be helpful.


I will gets on that when I get home. I will make sure to updated to 19th's pvst first though.

Author:  Buzztler [ Mon Feb 20, 2012 12:49 pm ]
Post subject:  Re: new pvst beta (updated 19-Feb-2012)

Quote:
i think the only difference of matilde 3-1.10rc1 is 'native' multi-out support ... you can already use polac (multi-)out with 2-1.9rc8 so why do you want to use 3-1.10rc1
with the polac adapter ?

Thank you th0ke for your remark, indeed I switched back to rc7 'cause I didn't know it works with rc8 too I'll check this out.

@polac: :lol: thanks for your work and your latest comments, this is :ugeek: 8-) :o :mrgreen: thumbs up(!)

Author:  polac [ Wed Feb 22, 2012 6:04 pm ]
Post subject:  Re: new pvst beta (updated 22-Feb-2012)

Quote:
PXP Row Quantization would be useful as a global option in addition to the F4.. I pretty much always enable it when recording midi. If it were global I could set it to be on all the time, and then only disable it when needed.


Ok now it's on global too.

Page 3 of 18 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/