SnowMachines combined thread

[AndersBrontosaurus]

Just want to report that I've experienced no mangles here with new version. Tracks work as usual.

Q: will there be a way to control activationbuttons A-Z via keycombo or shall I find out how to do it through AutoHotKey?

[snowglobe]

Just want to report that I've experienced no mangles here with new version. Tracks work as usual.

Q: will there be a way to control activationbuttons A-Z via keycombo or shall I find out how to do it through AutoHotKey?

There will be, eventually. No promises on a timeline for that, though.

[snowglobe]

Update 2016-2-21 ** ScaleWalker & SnowglobeCore: minor refinements in scale-matching, and a bugfix for stuck-note protection system.

[snowglobe]

Update 2016-2-28 Scalewalker and SnowglobeCore

1. double-click on timing spec values to type in values
2. note-off kills associated cycle immediately *

*Up until now, cycles would play out all the way to the end once fired. This change is sort of on a trial basis, and I may revert it if anyone (including me) ends up feeling like they miss the original behavior.

[mridlen]

Sweet! Thanks!

[snowglobe]

Update 2016.3.5 -- ScaleWalker (also replace SnowglobeCore) -- peer rules

modes:

• specific value
• random-from-range
• bump

Bump is the most complicated of the options. You may choose boundary limits other than the param's max/min.
You also (necessarily) choose what happens if the bump amount takes you to a boundary -- stop, wrap, bounce.
If the repeat box is checked for the bump mode you then choose the number of times to repeat the bump over some number of beats.

[tinga]

Update 2016.3.5 -- ScaleWalker (also replace SnowglobeCore) -- peer rules

I wanted to ask for that, but I was sure that you do it.
Great, very high automation level in Buzz, thanks for this highly appreciated update.

[snowglobe]

I wanted to ask for that, but I was sure that you do it.

I hope it comes in handy for you.

By the way, the bounce option for a bump+repeat rule behaves sort of like peerlfo.
https://drive.google.com/file/d/0B6ENwH ... BIVEU/view

[snowglobe]

update 2016-3-6 ** ScaleWalker & SnowglobeCore: fixed recently broken auto-cut; update number in right corner of GUI; qwerty-midi now works when scale selection pop-up has mouse focus

[tinga]

I hope it comes in handy for you.

Of course yes, my situation with peer machines became a sort of deadlock, and Scale Walker is definitely the way for me, but it also makes my stuff obsolete, I dreamed about a machine to centralize all commands, my first tests with peer rules are very positive, so thanks again for your crazy machines.

[BigDplayboy]

Snowglobe, I can't PM you because of my 'newbie'-status ... Anyways, I got a crash using SnowGlobe TargetPractice.

Description:
In 'index=n' mode while playing sounds, changing 'n' to an invalid index crashes SnowGlobe TargetPractice machine.

How to reproduce:
1. Start a new song in Jeskola Buzz.
2. Add SnowGlobe TargetPractice (I'll call it STP from now on).
3. Add a generator that accepts 'input' from the STP.
4. Add at least one note to the STP pattern, so it has sound playing.
5. Add/enable the pattern in the sequence editor and press 'play' (it should loop now).
6. Go to machine view and open the parameters window of the STP:
a. Enable/assign the generator machine to receive input from STP. (sound should be heard now)
b. Set parameter '0-Mode' to 'index=n'.
c. Changing parameter '0-n' to anything other than 0 crashes the STP on the next note.

In other words, when n points to an invalid index, it crashes. Sounds like an 'out of bounds' programming bug

I love the potential of these peer machines of yours, I'll play some more with them and let you know if I find any more bugs. Once these machines come out of beta, they'll be awesome!

[snowglobe]

Update: bugfix in SnowglobeCore: machines would crash if using "index = n" selection mode for n > max index

Anyways, I got a crash using SnowGlobe TargetPractice.

In 'index=n' mode while playing sounds, changing 'n' to an invalid index crashes SnowGlobe TargetPractice machine.

Thanks for the report. Now the result wraps around, so that, for example, if you have 3 targets and you set your n to 5 you end up hitting target at index = 2

Code: Select all

n            0 .. 1 .. 2 .. 3 .. 4 .. 5
result       0 .. 1 .. 2 .. 0 .. 1 .. 2

[tinga]

Snowglobe, you're an avalanche of good news for me, Scalewalker with peer rule is absolutely awesome, in my templates, Scalewalker is controlled by IX Accumulator, Scalewalker rules Accumulator, I like these loops, and the bump mode is perfect, seriously, Scalewalker is one of the most evolved system for generative music, live with new interfaces, midi but not only, triggers (PeerTrig ), xboxpad, leap motion, computer's keyboard, very ergonomic, modularity, a living pattern editor...

[snowglobe]

Snowglobe, you're an avalanche of good news for me, Scalewalker with peer rule is absolutely awesome, in my templates, Scalewalker is controlled by IX Accumulator, Scalewalker rules Accumulator, I like these loops, and the bump mode is perfect, seriously, Scalewalker is one of the most evolved system for generative music, live with new interfaces, midi but not only, triggers (PeerTrig ), xboxpad, leap motion, computer's keyboard, very ergonomic, modularity, a living pattern editor...

Ah, tinga, just when my interest in this project was starting to fade you get me thinking about it again ...

[tinga]

Ah, tinga, just when my interest in this project was starting to fade you get me thinking about it again ...

Anyway, you put ScaleWalker to a very high level, enormous tools, because ScaleWalker is a setup of machines, all the peer machines heritage is here, all these goodies combined in a very clever way, the interface is so clear, notes are modules, a single row can rule a lot of machines, great stability.
The snap midi in is not saved in the bmx, honor midi filter and others are saved. Fantastic to play on my keystation88 with the synchro, I'm working to have a complete orchestra, scalewalker is amazing for contrapuntic improvisation.
And the best is what I have to discover...

[tinga]

There is a small bug, if I load a bmx with a new set of scales, and if I edit one, when I reload it, scalewalker is crashed , we have can have 256 scales now, wasn't 128 before?
We can make very funny things with "scale edit" 5 -3, give a fourth progression by tone, etc... very useful to design (quickly) short melodic elements.

[River Cricket]

These machines seem incredible (though I wonder if a doofus like me will ever fully wrap his puny little head around them)!

One problem: When I add the Scale Snapper machine and double-click it to open the GUI, I get this screen of crash log gobbledegook.

If I click "OK" I get the machine's GUI, but clicking the "Scale" dropdown brings up the same error.

Everything from SnowSuite.zip is in \Buzz\Gear\Generators\ and I'm running the latest version of Buzz (1503).

[snowglobe]

When I add the Scale Snapper machine and double-click it to open the GUI, I get this

Confirmed. Will look into it. (tinga, yours, too)

[snowglobe]

Update 2016-7-16: replace SnowglobeCore, ScaleWalker, ScaleSnapper

There is a small bug, if I load a bmx with a new set of scales, and if I edit one, when I reload it, scalewalker is crashed

Should be ok now. Also, 'Restore Factory Set' should work now, and new instances of machine get Factory Set instead of most recently edited set.

When I add the Scale Snapper machine and double-click it to open the GUI, I get this screen of crash log gobbledegook.

Should be ok now.

Thanks for the reports.

[River Cricket]

This machine seems really exciting! Wish the tutorials were easier to find - maybe edit the links into the OP?

A few quick questions:

1. Is there a simple way of disabling / enabling all rules across all tabs? I'm trying to learn from the demo BMX, but disabling every rule one-by-one across 16 different tabs so I can follow along with the annotations in tab 1 is a bit cumbersome.

2. Is there any alternative to click-dragging? I'd really love textbox entry, especially when setting duration/cycle beats.

3. What's the quickest way of changing octaves? Is there anything similar to page up / page down in Polac's VST? Or do I have to manually assign everything one-by-one in the QWERTY editor screen?

4. I'm getting a strange problem with clipped (as in, shortened - not volume-clipped) notes. It happens most often when sliding from a natural to an accidental - it's like the slide counts as a new note for the purposes of ending the currently-held note, but doesn't count as a new note for the purposes of starting the next note. Really throws off my JamKeying

5. What do the A-Z letters at the bottom of the GUI signify?