Levels of MixIO

Post Reply
User avatar
HerrFornit
Posts: 435
Joined: Sat Feb 25, 2017 12:27 pm
Location: Dortmund
Contact:

Levels of MixIO

Post by HerrFornit »

Hi,

I have tried two diferent setups (s. below). All Levels are adjusted to zero x^3/90.
In case1 the drums are louder than in case 2.
For me it should be the same level in both cases, because no gain is given at any point ???
PS: Reverb is not the reason.
MixIO Case1.jpg
MixIO Case1.jpg (20.6 KiB) Viewed 4027 times
MixIO Case2.jpg
MixIO Case2.jpg (21.86 KiB) Viewed 4027 times
I have no explanaition for this.
User avatar
UNZ
Posts: 808
Joined: Mon Nov 21, 2011 9:42 pm
Contact:

Re: Levels of MixIO

Post by UNZ »

the thing i see that is different is that in screenshot 2, the connection from the reverb to mixio2 is going to channel 2 instead of channel 0 (master) in the first screenshot, maybe the levels on these channels are different. also, are you aware that all channels get mixed into channel 0 ?

otherwise i'd have to look at the bmx..
User avatar
HerrFornit
Posts: 435
Joined: Sat Feb 25, 2017 12:27 pm
Location: Dortmund
Contact:

Re: Levels of MixIO

Post by HerrFornit »

Hi UNZ,

thanx for reply!

I case 1 I get in MixIO2 (L/R peaks) -3/-4 db
In case 2 I get -5/-6 db

I send you the bmx, reverb is on standby.
Test MB.zip
(4.78 MiB) Downloaded 208 times
User avatar
UNZ
Posts: 808
Joined: Mon Nov 21, 2011 9:42 pm
Contact:

Re: Levels of MixIO

Post by UNZ »

unfortunately my buzz crashes trying to open this bmx, is it possible to simplify it to just matilde and mixio for testing?
User avatar
HerrFornit
Posts: 435
Joined: Sat Feb 25, 2017 12:27 pm
Location: Dortmund
Contact:

Re: Levels of MixIO

Post by HerrFornit »

oh, sorry,

I send you 2 reduced files. One mit MT Power Drum Kit + Matilde and one with Matilde only.
Also a picture of the whole original setup.
Hope that does make sense!
thanx.
Test MB reduced.zip
(9.52 MiB) Downloaded 215 times
User avatar
UNZ
Posts: 808
Joined: Mon Nov 21, 2011 9:42 pm
Contact:

Re: Levels of MixIO

Post by UNZ »

i found the problem

on the connection from mixio to mixio2 you have a 1.9db gain boost :)

set that to 0 and everything makes sense again.
User avatar
HerrFornit
Posts: 435
Joined: Sat Feb 25, 2017 12:27 pm
Location: Dortmund
Contact:

Re: Levels of MixIO

Post by HerrFornit »

oh no, that simple. I should have seen that! :oops:

Thanx anyway! ;)
Post Reply