I have many old Buzz projects that contain machines that were wrapped using the stereo wrapper. These now appear as missing machines. Although I could swap these out one by one I'd lose the parameter tracking for them...
Is there a workaround ?
*Edit: Here's a screenshot showing an example of the extent of this...
Old stereo wrapper machines - workaround for opening bmx?
-
- Posts: 9
- Joined: Fri Apr 06, 2012 2:53 am
Re: Old stereo wrapper machines - workaround for opening bmx
Use this patcher.
Lee Dragon mono to stereo:
This patcher makes stereo versions of all the mono machines. Lovely!
This should solve your problem.
Lee Dragon mono to stereo:
This patcher makes stereo versions of all the mono machines. Lovely!
This should solve your problem.
-
- Posts: 9
- Joined: Fri Apr 06, 2012 2:53 am
Re: Old stereo wrapper machines - workaround for opening bmx
Thanks, tinga. I was under the impression that the patched machines wouldn't work in the new Buzz builds.
I should have tested it out first. Hopefully someone else will be helped by this post someday.
I should have tested it out first. Hopefully someone else will be helped by this post someday.