Page 2 of 2

Re: BuzzSetup x64 2022 Edition

Posted: Mon Dec 19, 2022 6:33 pm
by temporalsounds
UNZ wrote:
Mon Dec 19, 2022 4:05 pm
Does it behave different for you on 32bit buzz than on 64bit?
Hi UNZ
Yes it does.I recorded short video if you willing to see:
short video mixIO 32 and 64

thank you

Re: BuzzSetup x64 2022 Edition

Posted: Mon Dec 19, 2022 7:23 pm
by UNZ
ok, that's odd, is Settings/ProcessMutedMachines the same on both builds?

by the way, ignore my previous comment, it's wrong and only applies to the (unreleased yet) mixio 2.0.

i want to know if it's a problem with the GUI or Buzz:
if you right click on mixio and show parameters, and then do a SOLO there in parameter window, do the MUTE parameters move on x64?

The way it works in 1.3 is that mixio sends a ParameterChange to itself on SOLO, and it looks like that's not happening on your machine.

Re: BuzzSetup x64 2022 Edition

Posted: Mon Dec 19, 2022 8:36 pm
by temporalsounds
UNZ wrote:
Mon Dec 19, 2022 7:23 pm
ok, that's odd, is Settings/ProcessMutedMachines the same on both builds?

i want to know if it's a problem with the GUI or Buzz:
if you right click on mixio and show parameters, and then do a SOLO there in parameter window, do the MUTE parameters move on x64?

The way it works in 1.3 is that mixio sends a ParameterChange to itself on SOLO, and it looks like that's not happening on your machine.
another short video :
with mixIO parameters

Settings is same for both builds

EDIT:
thank you so much UNZ for response

Re: BuzzSetup x64 2022 Edition

Posted: Mon Dec 19, 2022 8:53 pm
by magmavander
Hello,

I have installed version 1.0. No problem for installing.
When I launch the bmx made with the previous version I have this message (see picture)
Buzzx64 1.0.jpg
Buzzx64 1.0.jpg (16 KiB) Viewed 1442 times
The french parts means :
cannot read past end of stream

But no problem when I click ok and finish loading the bmx and play it.

I downloaded and loaded the remix of this bmx by MrDadrox and no message.

Thanks!!! :dance: :dance: :dance:

PS : this bmx and the remix use only machines provided by wde.

PS2 : very nice quick start tutorial

Re: BuzzSetup x64 2022 Edition

Posted: Tue Dec 20, 2022 10:03 am
by HerrFornit
Had crash with collapse of buzz x64 1.0 by starting signal analyisis of a 32 bit vst instrument while song playing (OLDER SONG). The headline of the error message was windows base ... couldnt make screenshot.
I have parallel installation with x86 buzz without reg cleaning.
Signal analysis mode was 'VST'

EDIT:
2nd run of x64 1.0:
Loading 2nd time the same song, buzz asked me for dlls of some vsts (in sub folder meldas), which it did not at first loading (!?).
Startet signal analysis of the context menu again, same error "windows base, stopped distributing processing" or something like that. This time I got BSOD 0x000000008 when changing to firefox. Same for non vst machine.
EDIT3: I did reinstallation in a different installation folder than 32 bit, sorry, no BSOD now. but error when trying signalanalysis VST plugin
Unbenannt.JPG
Unbenannt.JPG (26.61 KiB) Viewed 1309 times
EDIT2:
tested snap machine a bit. Looks like only the last moved machine is bening snapped to grid. ok, Its not consistent hmmm, ahh its a matter of focus, you can use either one or all machines !!! So no bug !!! Nice!

Re: BuzzSetup x64 2022 Edition

Posted: Tue Dec 20, 2022 10:46 pm
by UNZ
temporalsounds wrote:
Mon Dec 19, 2022 8:36 pm
another short video :
with mixIO parameters

Settings is same for both builds
yeah this looks like a bug in buzz64, or at least it doesn't behave like buzz32. for some reason parameterchanges to itself are not sent / received by mixio... might have something to do with threading across the bit bridge. will have to look into it if there's something i can do, don't have a buzz64 setup yet. also, mixio2 will probably do it different anyway... is anyone else having the same problem?

Re: BuzzSetup x64 2022 Edition

Posted: Sun Dec 25, 2022 5:18 pm
by magmavander
Hello,

so it seems my problem happens only with this particular bmx (see my previous post in this thread).
I have tested another bmx I created just for that with connections and patterns to be sure.
I reloaded the bmx and no more message. Same when I start a new buzz session.
I suppose it was a particular machine that makes this windows appears.

The Modern pattern editor is really interseting. First I didnt understand very well how it works but after clicking everywhere I have to say that I'm convinced :dance: ;)

Thanks!!

Re: BuzzSetup x64 2022 Edition

Posted: Mon Dec 26, 2022 8:52 pm
by HerrFornit
Hey like this release more and more,

Feature requests:
-A modern design for me is also rather a horizontal sequence view than the vertical. :D
-Then another cool feature, but prob Oskaris part, would be to see the level meters at the left and right vertical edges of the machine box in machine view ! Then you could better see the signal flow while playing!
-Snap machines: would be cool to have automatically snap to grid after moving and loosing the machine!
-Did you find a way to implement the time signature in min:sec.xx ?

Thanx a lot and nice celebration days!

Re: BuzzSetup x64 2022 Edition

Posted: Fri Dec 30, 2022 9:54 am
by HerrFornit
magmavander wrote:
Mon Dec 19, 2022 8:53 pm
Hello,

I have installed version 1.0. No problem for installing.
When I launch the bmx made with the previous version I have this message (see picture)
Hey mag & temporalsounds,

did you install x64 2022 edition alone or parallel with pre-installed x86 version?
I think the parallel installation does bring problems, e.g. polac vst path problems while loading "x86-songs" (vst not found file rquester)

Thanx

Re: BuzzSetup x64 2022 Edition

Posted: Sat Dec 31, 2022 10:27 am
by temporalsounds
Hi HerrFornit
I have installed my old -both versions 1503 x86 build and 1503 x64 build parallel, time ago on my computer.
I installed WDE x64 2022 only version on children's computer (Windows 11 ),for trying UNZ mixIO.
I just copy some .dll files from children's computer to my "old" 1503 buzz x64 (my computer).
If i want to open bmx file on my computer uploaded from MrDadrox on bTunes, I got this message:
I dont have any issues for finding VSTs,see my videos above..

Re: BuzzSetup x64 2022 Edition

Posted: Sat Dec 31, 2022 5:42 pm
by magmavander
No parallel installation. It's on my new computer so it's a fresh install ;)

Re: BuzzSetup x64 2022 Edition

Posted: Mon Jan 02, 2023 1:46 pm
by HerrFornit
Thanx Guys!

I will try clean installation when I have some more time ...

... and happy new year ! :dance:

Re: BuzzSetup x64 2022 Edition

Posted: Thu Jan 05, 2023 9:06 am
by temporalsounds
yeah , Happy New Year too :dance:

Re: BuzzSetup x64 2022 Edition

Posted: Thu Jan 05, 2023 6:42 pm
by wde
Some fixes. BuzzEngine32 might not behave exactly like buzz32, looking forward to try mixio 2.0 ;)

Re: BuzzSetup x64 2022 Edition

Posted: Sat Jan 14, 2023 10:10 pm
by HerrFornit
thanx for update. I report here error messages by marstec, user in discord. He is using Win7 and the newest buzz 2022 version. He is asking if somebody else is experiecing this errors.
image.png
image.png (38.91 KiB) Viewed 844 times
image-1.png
image-1.png (18.53 KiB) Viewed 844 times

Re: BuzzSetup x64 2022 Edition

Posted: Sat Jan 28, 2023 9:50 pm
by HerrFornit
Just tries to install BUZZ 2022 edition onto a fresh Win11 Pro system. Following errors occured in a row for many files when skipped. Error 2 means: " The system can not find the given file". Same for run as Admin.
Screenshot 2023-01-28 224034.png
Screenshot 2023-01-28 224034.png (26.66 KiB) Viewed 345 times
EDIT: Perhaps a alias issue? German path!