midi question
midi question
How do I send midi from one buzz synth to other synths and peer machines?
Re: midi question
I don't think you can do that. What are you trying to achieve?
Re: midi question
I was trying to send the same notes to 3 different synths...guess I'll have to use the split device? Is there any way to do it without having to copy all 30 of my patterns from Qsamo and paste them into the split device though?
Re: midi question
Maybe someday native machines will offer PVSTi-style MIDI-send, but for now you're probably stuck copying all 30 patterns (unless you want to try your luck with some sort of audio-to-MIDI converter).mes wrote:I was trying to send the same notes to 3 different synths...guess I'll have to use the split device? Is there any way to do it without having to copy all 30 of my patterns from Qsamo and paste them into the split device though?
Re: midi question
this is what peer machines are for. just assign multiple generators to it.
Re: midi question
True enough "before the fact", but OP seems to have an "after the fact" quandry -- 30 Qsamo patterns already made, and now he's hoping he can layer in other generators without copying patterns over to a peer machine.UNZ wrote:this is what peer machines are for. just assign multiple generators to it.
Re: midi question
so he made 30 copies, but one additional copy to a peer ctrl is too much ?snowglobe wrote:True enough "before the fact", but OP seems to have an "after the fact" quandry -- 30 Qsamo patterns already made, and now he's hoping he can layer in other generators without copying patterns over to a peer machine.UNZ wrote:this is what peer machines are for. just assign multiple generators to it.
Re: midi question
LOL. Pretty sure he was talking about having made 30 different patterns (each of which would need to be copied). But anyway, ima shut up about this now, at least until OP chimes back in.UNZ wrote:so he made 30 copies, but one additional copy to a peer ctrl is too much ?
Re: midi question
snowglobe wrote:LOL. Pretty sure he was talking about having made 30 different patterns (each of which would need to be copied). But anyway, ima shut up about this now, at least until OP chimes back in.UNZ wrote:so he made 30 copies, but one additional copy to a peer ctrl is too much ?
yea this is what I meant...copying the 30 patterns will work but is a bit tedious right? I'll just have to start using Split for all Buzz synths.
- AndersBrontosaurus
- Posts: 516
- Joined: Mon Feb 25, 2013 9:31 am
- Location: Fellingsbro
Re: midi question
Woof?
Can IXSplit to this?
The only machine I knew about to export notes was PeerChord.
I really need to understand the ix-machines. Next on my list.
Can IXSplit to this?
The only machine I knew about to export notes was PeerChord.
I really need to understand the ix-machines. Next on my list.
Re: midi question
If you are using VSTi just clone the machine and replace the VST or change the patch.
You can also load Buzz machines in Polac VSTi , allowing for this type of thing as well.
You can also click "columns" and add note tracks from other synths to your pattern, which depending on how complex it is, might be easier than copy and pasting.
Also, the new Pattern XP mod has pattern import/export I believe although I have not used it.
Hope that helps in some small way.
You can also load Buzz machines in Polac VSTi , allowing for this type of thing as well.
You can also click "columns" and add note tracks from other synths to your pattern, which depending on how complex it is, might be easier than copy and pasting.
Also, the new Pattern XP mod has pattern import/export I believe although I have not used it.
Hope that helps in some small way.
- AndersBrontosaurus
- Posts: 516
- Joined: Mon Feb 25, 2013 9:31 am
- Location: Fellingsbro
Re: midi question
Thanks!
It probably did. This is next on my studylist. Casefile IXix.
It probably did. This is next on my studylist. Casefile IXix.
- onecircles
- Posts: 333
- Joined: Wed Mar 26, 2014 7:07 am
Re: midi question
Pattern XP mod can save and load patterns iirc, although I haven't experimented with that feature.
- szaszhareen
- Posts: 527
- Joined: Wed Nov 23, 2011 1:15 am
- Location: deep beneath the earths crust
Re: midi question
favorite show: the iXfilesAndersBrontosaurus wrote:Thanks!
It probably did. This is next on my studylist. Casefile IXix.
XD
Re: midi question
Why not Cyanphase mc-1?mes wrote
I was trying to send the same notes to 3 different synths...
- AndersBrontosaurus
- Posts: 516
- Joined: Mon Feb 25, 2013 9:31 am
- Location: Fellingsbro
Re: midi question
Thanks, all of you above! Something new learnt. Feels good.
I'll look into this.
/Anders
I'll look into this.
/Anders
Re: midi question
To clarify, IX Split can only send notes to the target machines, not MIDI. You can play it with MIDI but pitch bend etc. won't work. Just notes and velocities.AndersBrontosaurus wrote:Can IXSplit to this?
- AndersBrontosaurus
- Posts: 516
- Joined: Mon Feb 25, 2013 9:31 am
- Location: Fellingsbro
Re: midi question
This is perfectly fine for my needs! And I really need to investigate ixmachines further!IXix wrote:To clarify, IX Split can only send notes to the target machines, not MIDI. You can play it with MIDI but pitch bend etc. won't work. Just notes and velocities.AndersBrontosaurus wrote:Can IXSplit to this?
Sweet as! Just what I needed. Easy as pie.beuze wrote:Why not Cyanphase mc-1?mes wrote
I was trying to send the same notes to 3 different synths...
Apparently yes. Maybe I've failed due to using built in editor in old songs.onecircles wrote:Pattern XP mod can save and load patterns iirc, although I haven't experimented with that feature.
Finally, sorry for hi-jacking the thread. Wasn't supposed to happen but I'm happy for it.