new pvst beta (updated 03-Dec-2023)

polac
Posts: 415
Joined: Wed Nov 23, 2011 9:19 am
Contact:

Re: new pvst beta (updated 25-Dec-2014)

Post by polac »

mridlen wrote:I'm getting load errors on BiFilter 1.61 when setting up my new laptop (old laptop had an electronic failure of some sort). Not to worry, I keep good backups of everything. However, I cannot figure out how to troubleshoot this problem.

OS Platform is Windows 10 64-bit, with the usual 32-bit Buzz install.

Running the latest pvst builds 1.1.10b build 30.

I've gotten all my other errors cleared up (had some issues with Synthmaster, but it turned out that I had just loaded up the 64-bit dll instead of the 32-bit one) but this is the final nagging issue with getting migrated to Windows 10

Error Message
Title bar just says "Load Error" and the body contains the path to the DLL.

I have 2 sources I could find for this VST (shared for your convenience):

https://www.dropbox.com/s/ggusv1wjnt8yg ... p.exe?dl=0

Just the dll file and manual:

https://www.dropbox.com/sh/wy6wdij80uze ... znpMa?dl=0

Thanks for the help in advance! And thanks Polac for the best VST support of any DAW.
Perhaps there is a missing dll. Did you try to run dependancy walker to find out which dlls are missing? Perhaps you have to install some older c++ redistributables.
boombaxx
Posts: 279
Joined: Tue Dec 06, 2011 6:54 pm

Re: new pvst beta (updated 25-Dec-2014)

Post by boombaxx »

Hi i have noticed that using prevent focus stealing stops me from saving the preset with a different name. When i click on the name to change it nothing happens or press a letter on my keyboard a note is played instead of changing preset name. When focus stealing is off i can change names no problem latest buzz and polac win 7. Happens with every synth i have tried it with
User avatar
Klangkulisse
Posts: 304
Joined: Tue Nov 22, 2011 12:20 am
Location: ••• Düsseldorf ••• Made of Light

Re: new pvst beta (updated 25-Dec-2014)

Post by Klangkulisse »

There is a similiar effect I noticed while being in prevent focus stealing mode:
Some synth allow to enter values by typing in drop down menus or text fields or what ever, but you can't in that mode.
May be it's the same issue.
boombaxx
Posts: 279
Joined: Tue Dec 06, 2011 6:54 pm

Re: new pvst beta (updated 25-Dec-2014)

Post by boombaxx »

Everyone has been updating there ui for hd. I cannot remember it being a problem in the past even with pfs on ?.
polac
Posts: 415
Joined: Wed Nov 23, 2011 9:19 am
Contact:

Re: new pvst beta (updated 25-Dec-2014)

Post by polac »

Prevent focus stealing is meant to be used only with selected vsts, if for example the plugin always steals the focus on clicking a knob or fader without a good reason. If a plugin really requires pc keyboard input you have to disable the prevent focus stealing feature of course.
User avatar
UNZ
Posts: 808
Joined: Mon Nov 21, 2011 9:42 pm
Contact:

Re: new pvst beta (updated 25-Dec-2014)

Post by UNZ »

polac wrote:Prevent focus stealing is meant to be used only with selected vsts, if for example the plugin always steals the focus on clicking a knob or fader without a good reason. If a plugin really requires pc keyboard input you have to disable the prevent focus stealing feature of course.
i think it would be cool if the "prevent focus stealing" option was made more accessible so you could enable/disable it quickly. Like maybe make it an entry in the EDIT Menu. It's a godsend for keyjazzing on all those VST that insist on having built in patch browsers that requires mouse clicks (while of course stealing focus.. such a dumb design but seems pretty prevalent...). It's at least as important as all the other options in the EDIT menu (like Oversampling, Run In Separate Process, Freeze etc), so it wouldn't be missplaced there imho.
polac
Posts: 415
Joined: Wed Nov 23, 2011 9:19 am
Contact:

Re: new pvst beta (updated 25-Dec-2014)

Post by polac »

i think it would be cool if the "prevent focus stealing" option was made more accessible so you could enable/disable it quickly. Like maybe make it an entry in the EDIT Menu. It's a godsend for keyjazzing on all those VST that insist on having built in patch browsers that requires mouse clicks (while of course stealing focus.. such a dumb design but seems pretty prevalent...). It's at least as important as all the other options in the EDIT menu (like Oversampling, Run In Separate Process, Freeze etc), so it wouldn't be missplaced there imho.
Yes I also thought about this, I'll add this to the next loader version.
User avatar
Joachip
Posts: 352
Joined: Mon Nov 21, 2011 7:21 pm
Contact:

Re: new pvst beta (updated 25-Dec-2014)

Post by Joachip »

Just reinstalled my machine, and had a few of the usual hiccups you always have through such a process, and I noticed one thing: Polac VST only added a VST folder sitting inside the Buzz folder. It did not discover the real VST folder where all the plugins are installed. I don't know if maybe I missed some setup-procedure of pvst here, that would have caused it to find the real VST folder of the OS?

Did I goof up something or is it necessary to manually tell pvst where the VST folder is?
polac
Posts: 415
Joined: Wed Nov 23, 2011 9:19 am
Contact:

Re: new pvst beta (updated 25-Dec-2014)

Post by polac »

Joachip wrote:Just reinstalled my machine, and had a few of the usual hiccups you always have through such a process, and I noticed one thing: Polac VST only added a VST folder sitting inside the Buzz folder. It did not discover the real VST folder where all the plugins are installed. I don't know if maybe I missed some setup-procedure of pvst here, that would have caused it to find the real VST folder of the OS?

Did I goof up something or is it necessary to manually tell pvst where the VST folder is?
It only recognizes the folder inside the buzz folder, the default vst folder in programs folder is not recognized if i remember correctly(not sure however, have to check).
boombaxx
Posts: 279
Joined: Tue Dec 06, 2011 6:54 pm

Re: new pvst beta (updated 25-Dec-2014)

Post by boombaxx »

polac wrote:
i think it would be cool if the "prevent focus stealing" option was made more accessible so you could enable/disable it quickly. Like maybe make it an entry in the EDIT Menu. It's a godsend for keyjazzing on all those VST that insist on having built in patch browsers that requires mouse clicks (while of course stealing focus.. such a dumb design but seems pretty prevalent...). It's at least as important as all the other options in the EDIT menu (like Oversampling, Run In Separate Process, Freeze etc), so it wouldn't be missplaced there imho.
Yes I also thought about this, I'll add this to the next loader version.
Nice to hear there is a new version of pvst coming out :D
boombaxx
Posts: 279
Joined: Tue Dec 06, 2011 6:54 pm

Re: new pvst beta (updated 25-Dec-2014)

Post by boombaxx »

I am trying to use kontakt 5 x64 in X64 win7 Buzz latest version Polac latest version. I am having a problem with kontakt instruments not being saved along with the song. They are coming back blank after saving. So any work u have put into the instruments is lost. Especially u spent a couple of hours building a nice rack of instruments. To open as blank instruments is a real bummer. Kontakt keeps crashing as well.
boombaxx
Posts: 279
Joined: Tue Dec 06, 2011 6:54 pm

Re: new pvst beta (updated 25-Dec-2014)

Post by boombaxx »

memtest 86 first i think.Faulty ram looks like
User avatar
xenobioz
Posts: 117
Joined: Wed Nov 23, 2011 11:20 am
Contact:

Re: new pvst beta (updated 25-Dec-2014)

Post by xenobioz »

Hi,
I downloaded a vst3 called sori from en.catsnu.com/Project/GugakVSTi.aspx
But the GUI is blank.
Anyone got it to work?
polac
Posts: 415
Joined: Wed Nov 23, 2011 9:19 am
Contact:

Re: new pvst beta (updated 25-Dec-2014)

Post by polac »

500mb download, wtf is this, a rompler? :mrgreen:
User avatar
xenobioz
Posts: 117
Joined: Wed Nov 23, 2011 11:20 am
Contact:

Re: new pvst beta (updated 25-Dec-2014)

Post by xenobioz »

Yes it's a rompler. :D
I think it contains the same sounds as the ones that are below on the same page, but I don't have kontakt, EXS24 or live or whatever is need for those.
Not sure if it includes all of the instruments though.
It installs the sound files in C: which is annoying, but if it's possible to make it work I'll try move the files and use symbolic links.
polac
Posts: 415
Joined: Wed Nov 23, 2011 9:19 am
Contact:

Re: new pvst beta (updated 29-Apr-2018)

Post by polac »

New version online, just a bugfix for the polac asio driver.
User avatar
IXix
Posts: 1113
Joined: Wed Nov 23, 2011 3:24 pm

Re: new pvst beta (updated 29-Apr-2018)

Post by IXix »

polac wrote:New version online, just a bugfix for the polac asio driver.
Thanks Polac! :dance:
boombaxx
Posts: 279
Joined: Tue Dec 06, 2011 6:54 pm

Re: new pvst beta (updated 29-Apr-2018)

Post by boombaxx »

thanks a lot works perfect :dance: :D
User avatar
Buzztler
Posts: 222
Joined: Sat Jan 21, 2012 2:54 pm
Location: Faraway but near enough

Re: new pvst beta (updated 29-Apr-2018)

Post by Buzztler »

:mrgreen: Well, seems to work
especially my wish: Hello again, "Sir" Polac. I just have one wish for the Matilde2-Wave-Editor that you have built, could you please insert an option to choose, if the edited wav-files are stored in the bmx or not? This would be fantastic (imo).
esp. Yeah, it is fantastic, 'cause it was already integrated by you in the former Version, thx for not mentioning it when I asked for the Integration of this Feature :D
Anyway, I did some Publicity for this Feature ...
Ah and btw I'm almost convinced you forgot to update the Version number of the loader in the about field.
Does this mean that we grow older?!? ;)
User avatar
HerrFornit
Posts: 435
Joined: Sat Feb 25, 2017 12:27 pm
Location: Dortmund
Contact:

Re: new pvst beta (updated 29-Apr-2018)

Post by HerrFornit »

Fantastic to see, that it is still maintained. :)

Is it a lot of work to pack it into an installer?

Updating it in an interval of years means that I have to look for magmavanders video, how to install it.

By the way, it would be great to have buzz with the polac vsti loader and with the patternxp mod in one exe. So it could be easily installed on a fresh system. ;)

If it is to much effort, it would help to have the path info in the zip file?
Post Reply