Polac Audio In should work nicely with Polac ASIO (via ASIO4ALL if necessary).xenobioz wrote:Using WASAPI to record from a Microphone does not work using Polac Audio In.
I got it working with MME only but it had a really high latency and lower latency sounded really bad.
If it would be possible to use WASAPI for mic recording it would be great I think.
But maybe it's hard to implement.
new pvst beta (updated 03-Dec-2023)
Re: new pvst beta (updated 12-Jan-2014)
Re: new pvst beta (updated 12-Jan-2014)
Yes, Probably it does. I was just hoping I would not need to install ASIO4ALL if WASAPI would have worked.snowglobe wrote: Polac Audio In should work nicely with Polac ASIO (via ASIO4ALL if necessary).
Re: new pvst beta (updated 12-Jan-2014)
Hello,
I recently bought EZdrummer 2 from Toontrack and the x64 version does not load sound libraries.
Running it in a seperate process does not help.
It works for example in VSTHost or Cantabile here.
No problems with the x32 version though.
Any idea why?
I recently bought EZdrummer 2 from Toontrack and the x64 version does not load sound libraries.
Running it in a seperate process does not help.
It works for example in VSTHost or Cantabile here.
No problems with the x32 version though.
Any idea why?
Re: new pvst beta (updated 12-Jan-2014)
Hi, if separate process is active, try to disable the "embedded gui" option, holding atl+ctrl when the mouse cusror hovers over the vst gui opens the bridgeing settings.thOke wrote:Hello,
I recently bought EZdrummer 2 from Toontrack and the x64 version does not load sound libraries.
Running it in a seperate process does not help.
It works for example in VSTHost or Cantabile here.
No problems with the x32 version though.
Any idea why?
Re: new pvst beta (updated 12-Jan-2014)
Thanks a lot, but disabling the "embedded gui" option does not make a difference.
I tried several bridging settings ... still no sound.
Not that important though ... the x32 version is working well.
I tried several bridging settings ... still no sound.
Not that important though ... the x32 version is working well.
Re: new pvst beta (updated 12-Jan-2014)
Actually, is not working in Bitwig, maybe someone could help me out ! Btw, a fully working Bitwig demo is a click away. Thanks!
Re: new pvst beta (updated 12-Jan-2014)
Sorry for the lack of information... so far I have tried mp4, mov, 3gp and Avi.
Avi is the only one "trygint to work" but it just plays the audio, and when I right click it I got all options and stuff but no video :S
Avi is the only one "trygint to work" but it just plays the audio, and when I right click it I got all options and stuff but no video :S
Re: new pvst beta (updated 12-Jan-2014)
Hi, sounds to me that the relevant directshow filters are missing on your system. Do you have divx/xvid video decoder packages installed for example? I also was able to playback mp4/mov files here successfully with the correct decoder packages installed, don't know exactly which codec package I did install here though.Cazue wrote:Sorry for the lack of information... so far I have tried mp4, mov, 3gp and Avi.
Avi is the only one "trygint to work" but it just plays the audio, and when I right click it I got all options and stuff but no video :S
Re: new pvst beta (updated 12-Jan-2014)
Hello, thanks for updating this thing, it's great!
I like this new features in built in pattern editor, like splitting and quantisation.
I found small glitch in Program changer column in pattern editor (Buzz pattern editor )
If you set one program in pattern editor and change it to another program in your vst GUI while pattern is playing, it doesn't change to this program in pattern editor after second play.
It would be great, if you can call up actual program to pattern editor by ctrl + t :>
In some plugins it's hard to set up values in "Parameter List", because of too small resolution (0-1000). Is it possible to change it to something like in "Track Parameter Value"? I don't like "Track Parameter Value" often, because it shows values in percentages only.
Last thing, i have problem with recording automations to envelopes in Drumatic 4, it crashes Buzz. You could download demo packed in zip here.
It's a bit tricky to choose parameters with learn function, beacuse sometimes it learns layout releated parameters... or something like that.
Big thanks.
I like this new features in built in pattern editor, like splitting and quantisation.
I found small glitch in Program changer column in pattern editor (Buzz pattern editor )
If you set one program in pattern editor and change it to another program in your vst GUI while pattern is playing, it doesn't change to this program in pattern editor after second play.
It would be great, if you can call up actual program to pattern editor by ctrl + t :>
In some plugins it's hard to set up values in "Parameter List", because of too small resolution (0-1000). Is it possible to change it to something like in "Track Parameter Value"? I don't like "Track Parameter Value" often, because it shows values in percentages only.
Last thing, i have problem with recording automations to envelopes in Drumatic 4, it crashes Buzz. You could download demo packed in zip here.
It's a bit tricky to choose parameters with learn function, beacuse sometimes it learns layout releated parameters... or something like that.
Big thanks.
Re: new pvst beta (updated 12-Jan-2014)
I can confirm Drumatic 4 does crash when recording automation, though it may be a problem with the plugin. As for the learn function, you an also go to settings tab (f4) and assign parameters manually if you're having trouble with it.
Re: new pvst beta (updated 12-Jan-2014)
I suppose you are speaking about the doubleclick dialog in the parameter list, yes I could do it the track parameter value way.In some plugins it's hard to set up values in "Parameter List", because of too small resolution (0-1000). Is it possible to change it to something like in "Track Parameter Value"? I don't like "Track Parameter Value" often, because it shows values in percentages only.
Yes I can confirm it here too, Buzz freezes on recording the envelopes, I'll take a closer look tomorrow.Last thing, i have problem with recording automations to envelopes in Drumatic 4, it crashes Buzz. You could download demo packed in zip here.
It's a bit tricky to choose parameters with learn function, beacuse sometimes it learns layout releated parameters... or something like that.
Re: new pvst beta (updated 12-Jan-2014)
So that would increase the resolution from 1000 to around 32000 right? Sounds really nice, but would it mess up any automation on songs written with older polac versions?
Re: new pvst beta (updated 12-Jan-2014)
No it doesn't break anything, the track value resolution is and stays at 32767, it's only the resolution in the parameter list doubleclick dialog I'm talking about here.esp81 wrote:So that would increase the resolution from 1000 to around 32000 right? Sounds really nice, but would it mess up any automation on songs written with older polac versions?
As it seem it also happens with other parameters, not only the env parameters are affected. It hangs/freezes in gui thread right after calling CMICallbacks::ControlChange(), for some reason it isn't a good idea to call it here with this plugin, I'll do some more testing.Last thing, i have problem with recording automations to envelopes in Drumatic 4, it crashes Buzz. You could download demo packed in zip here.
It's a bit tricky to choose parameters with learn function, beacuse sometimes it learns layout releated parameters... or something like that.
Re: new pvst beta (updated 12-Jan-2014)
Yes, but would be pretty cool, if this will work for fine tuning with shift key too.polac wrote:I suppose you are speaking about the doubleclick dialog in the parameter list, yes I could do it the track parameter value way.In some plugins it's hard to set up values in "Parameter List", because of too small resolution (0-1000). Is it possible to change it to something like in "Track Parameter Value"? I don't like "Track Parameter Value" often, because it shows values in percentages only.
GUI is causing problem, you're right. It's possible to record params without freezing by PeerCtrl for example.polac wrote:As it seem it also happens with other parameters, not only the env parameters are affected. It hangs/freezes in gui thread right after calling CMICallbacks::ControlChange(), for some reason it isn't a good idea to call it here with this plugin, I'll do some more testing.Last thing, i have problem with recording automations to envelopes in Drumatic 4, it crashes Buzz. You could download demo packed in zip here.
It's a bit tricky to choose parameters with learn function, beacuse sometimes it learns layout releated parameters... or something like that.
I know, but it is hard if your vst have many parameters. Drumatic 4 has over 1000esp81 wrote:As for the learn function, you an also go to settings tab (f4) and assign parameters manually if you're having trouble with it.
Re: new pvst beta (updated 12-Jan-2014)
I have it working now, somehow Drumatic 4 interferes with Buzz causing a deadlock(or sort of). If I'm using a async worker thread for sending the automation to Buzz it seems to work.GUI is causing problem, you're right. It's possible to record params without freezing by PeerCtrl for example.
Re: new pvst beta (updated 12-Jan-2014)
Is it possible to set this from preferences window? Some time ago i tried many combinations with running in separate process, but with no success.
Now i do something with async processing and loading this vst freezes buzz. I needed to clear this manually from config.xml.
Now i do something with async processing and loading this vst freezes buzz. I needed to clear this manually from config.xml.
Re: new pvst beta (updated 12-Jan-2014)
Yes this is what I planned.Is it possible to set this from preferences window?
Re: new pvst beta (updated 12-Jan-2014)
I own Drumatic 4 also .. loved the guys other stuff so much I just had to buy it and I don't regret it. The crashes that occur that I've seen aren't with Automation, but when trying to Auto-Learn certain paramters (and I think Randomize all via Preset Factory). I suspect it has to do with with multi-use Envelopes. Like, turning learn on and click on one of those tries to learn at least 4 parameters at one time and that's just on the current view. I havent had that problem in awhile though and to avoid it I assign certain parameters via the drop down list on F4 screen instead of using learn, such as Decay (more stuff is exposed there vs. the gui btw). I'll take another look later and if I remember - come back give & more specific details.esp81 wrote:I can confirm Drumatic 4 does crash when recording automation, though it may be a problem with the plugin. As for the learn function, you an also go to settings tab (f4) and assign parameters manually if you're having trouble with it.
edit: doh, missed this comment..
I do believe it has to do with the envelope editors though, fwiw..I have it working now, somehow Drumatic 4 interferes with Buzz causing a deadlock(or sort of). If I'm using a async worker thread for sending the automation to Buzz it seems to work.
Re: new pvst beta (updated 12-Jan-2014)
Confirmed here if the are also some parameters learned it will freeze on randomizing while recording. This is also fixed with the async automation option.but when trying to Auto-Learn certain paramters (and I think Randomize all via Preset Factory)
Re: new pvst beta (updated 12-Jan-2014)
Just to confirm the vst is working on bitwig. As suggested mayber I dont have the correect Codecs installed, but I got it working using differents video foprmats. Dont remember right now but I think that Divx codec worked and wmc too. I would just suggest to try out different formats.
Awesome plugin, looking foward to use it to learn some film scoring
Awesome plugin, looking foward to use it to learn some film scoring