Bug in Buzz Track Handling (or PXP ?)

Post Reply
User avatar
UNZ
Posts: 747
Joined: Mon Nov 21, 2011 9:42 pm
Contact:

Bug in Buzz Track Handling (or PXP ?)

Post by UNZ »

Do the following to reproduce:

-add an efx that has multiple tracks (for example mixIO or ParamEQ) in machine view.
-go to pxp and create a pattern for the efx.
-make sure the pattern has >1 tracks
-now click "Columns" and select only 1 column to display (choose a track parameter)
-create a new pattern, it will show up like the last one with only this column, so far so good
-click "Columns" again, now choose a different column to display, and switch off the other column.
-BOOM: buzz reduced the tracks count to 1

this creates quite some problems for my machine. All the multi-io plugs get reset to channel 0 when this happens (i guess because the machine gets a SetNumTracks(1) call). The gui still display the right channel, but if you right click on the plug it says channel 0. Tested it on 1410 and 1420.

oskari
Site Admin
Posts: 283
Joined: Mon Nov 21, 2011 2:04 pm

Re: Bug in Buzz Track Handling (or PXP ?)

Post by oskari »

Yes looks like a pattern xp bug.

User avatar
UNZ
Posts: 747
Joined: Mon Nov 21, 2011 9:42 pm
Contact:

Re: Bug in Buzz Track Handling (or PXP ?)

Post by UNZ »

fixed in 1421, thx oskari :)

Post Reply