Page 1 of 1
Getting a vocoder to work
Posted: Thu Sep 20, 2012 8:48 am
by Grids
I just cant seem to get any of the vocoders to work.
I put a vocal track from utrk in one channel and then a melodic synth line in the other...
I have tried using vocoderxp and tal vocoder...ive messed around with the inputs etc but i cant get it to even resemble a vocoder
Re: Getting a vocoder to work
Posted: Thu Sep 20, 2012 9:43 am
by mcbpete
Use LD Vocoder XP, tis much easier -
http://batman.no/buze/beta/ld%20vocoder%20xp.dll
You bung the input into it and pop up with a new box asking you whether it's a carrier or modulator (your synth will be the carrier, and the vocals the modulator). Simple !
EDIT: Hmmm, just read that you
have used VocoderXP, ignore me then - not sure why it's not working ....
Re: Getting a vocoder to work
Posted: Thu Sep 20, 2012 11:05 am
by thOke
does this setup with vocoder xp work for you ?
short mp3:
http://www.divshare.com/download/19610016-f22
ld vocoder xp is quite 'grainy' - my favourite free vst vocoder(s) is(are) Vocovee(& Voco)
http://www.g200kg.com/en/software/index.html
... and here the kickdrum bmx with tal vocoder instead of ld's xp
(you have to pan the carrier to the left and the modulator to the right):
Re: Getting a vocoder to work
Posted: Fri Sep 21, 2012 9:02 am
by tinga
There is also
slocoder, Fuzzpilz's effects are great, and now i use this vocoder, right click and manage inputs, very easy to use, and of course it's a Fuzzpilz machine, so take care with params
Re: Getting a vocoder to work
Posted: Fri Sep 21, 2012 3:47 pm
by thOke
i never used that one ... now i tried it and yes, it sounds better than the ld vocoder.
Re: Getting a vocoder to work
Posted: Wed Sep 26, 2012 5:19 pm
by Shro0m
Grids wrote:I just cant seem to get any of the vocoders to work.
I put a vocal track from utrk in one channel and then a melodic synth line in the other...
I have tried using vocoderxp and tal vocoder...ive messed around with the inputs etc but i cant get it to even resemble a vocoder
I never got TAL-Vocoder to work with "input mode" enabled either.
However, it comes with a built in modulator, so just use that one.
http://box.retrofox.dk/t2/vocoder_example.zip <-- Example
Re: Getting a vocoder to work
Posted: Sun Sep 30, 2012 12:40 am
by Grids
thanks for the tips....
Re: Getting a vocoder to work
Posted: Fri Jul 27, 2018 7:13 am
by HerrFornit
Hi,
I reopen this thread because I was trying to get my samples to sing with the LD VOCODER XP.
I tried it according to magmavanders youtube video (thanx a lot)
https://www.youtube.com/watch?v=GuAEWxnLJUI
But my BUZZ crashs in the moment when I connect the INFECTOR to the vocoder. I do not see the selection popup (carrier...)
I don't know why. Can't get it to work.
The ld vocoder XP is in the effects folder right? Tried different locations.
Re: Getting a vocoder to work
Posted: Fri Jul 27, 2018 3:38 pm
by magmavander
Yeah, it must be in Gear/effects... Strange that it crashes.
I have made a test with the latest Buzz version and no problem if I connect an infector to vocoderXP.
I have no idea sorry, maybe a missing dll ? Like the msvcr stuff maybe ?
How do you proceed exactly ?
Re: Getting a vocoder to work
Posted: Fri Jul 27, 2018 8:09 pm
by polac
I also think it's a missing dll. Try running dependancy walker.
Re: Getting a vocoder to work
Posted: Fri Jul 27, 2018 9:02 pm
by HerrFornit
Hi magmavander, hi Polac,
thanx for the hint
- DependencyWalker.jpg (84.7 KiB) Viewed 12626 times
the msvcr70 and MSVCR71.dll are in the BUZZ folder.
???
@magmavander
I followed your instructions step by step.
Re: Getting a vocoder to work
Posted: Fri Jul 27, 2018 9:30 pm
by magmavander
This is my Buzz folder :
Re: Getting a vocoder to work
Posted: Fri Jul 27, 2018 9:50 pm
by HerrFornit
Hi magamavander,
thank you. I have the same dll as you have.
I downloaded the 70 and 71 dll from the forum and replaced them, same result.
Perhaps I have to reinstall
EDIT: Did install BUZZ over the existing installation. Same problem.
Re: Getting a vocoder to work
Posted: Sat Jul 28, 2018 8:08 pm
by magmavander
Maybe you're missing a Microsoft visual C++ library on your system?
Re: Getting a vocoder to work
Posted: Sat Jul 28, 2018 8:47 pm
by HerrFornit
good idea:
- MS visual.jpg (33.21 KiB) Viewed 12604 times
the 2015 (for pattern xp mod) version can not be installed because "a newer version is installed".
But pattern xp works fine.
Re: Getting a vocoder to work
Posted: Sun Jul 29, 2018 2:21 pm
by magmavander
Ok, I dont have the 2017 but I have the 2015.
If you look at the list below, the 2015 version have been installed the same day that I installed Buzz.
Maybe you need the 2015 ?
Re: Getting a vocoder to work
Posted: Mon Jul 30, 2018 5:20 am
by HerrFornit
I did uninstall the 2017 library and installed the 2015. Same Problem.
thanx!
EDIT
I burried out the vocoder of the free mda package and could finally achieve to get a sample to sing, but your demo sound better
Mono left and mono right inputs:
- mda vocoder.jpg (12.4 KiB) Viewed 12578 times